Engine – Dismantle and Assemble (21 134 8) - Ford Scorpio
Engine – Dismantle and Assemble (21 134 8) - Ford Scorpio
Engine – Dismantle and Assemble (21 134 8) - Ford Scorpio
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Section TitleNOTE: A locking clip is supplied with new chaintensioners. If necessary, fabricate a locking clipfrom welding rod.64. Preload the chain tensioner (continued).Immobilise the sliding block in this positionwith a locking clip.S<strong>21</strong>0455<strong>21</strong>0 Nm64 Nm4365. Fit the camshaft chain drive.NOTE: The dots on the sprockets must beexactly opposite each other on the inside.1 Crankshaft sprocket.2 Crankshaft Woodruff key.3 Camshaft sprocket.4 Timing chain.5 Chain tensioner.6 Remove the locking clip after tensioner hasbeen fitted.511 Nm162S<strong>21</strong>04532<strong>21</strong>–13719 Nm66. Fit the timing cover. Fit the timing cover with a gasket <strong>and</strong> screwthe bolts in fingertight. Centre the timing cover using the specialtool <strong>and</strong> align it to the sump mating face. Tighten the nine bolts. Remove the special tool.S<strong>21</strong>04531xx/xx Model 00-01-23
Change language