LT-2002 MR-2100_2200 Operator's Manual Rev.0 - Secutron

More documents

Recommendations

Info

MR-2100/2200 Operator’s Manualof occurrence for events occurring at or to the panel. There may be a second screen includinginformation from the database. You can start by looking at either the last event (newest) or the firstevent (oldest). When viewing the events, scroll to the next one using the or theprevious one with the . will act as the last Left or Right arrow keypressed. and will flip between pages of the event.The screen of a single screen event shows:Line 1: time, sequence number, and dateLine 2: Condition Code and Zone Number (see section 2.1)Line 4: description of event (alarm, trouble, ground, restore, etc.)The first screen of a two screen event shows:Line 1: time, sequence number, and dateLine 2: Condition Code and Zone Number (see section 2.1)Line 3: description of event (alarm, trouble, ground, restore, etc.)Line 4: device typeThe second screen shows:Line 1: time, sequence number, and dateLines 2 to 4: description from the databaseProgram: Displays the Clock Menu. This menu has 2 options:Date: View or change the date. The date is entered in MM.DD.YY format. Each section ofthe date must be separated by a dot. Press to accept date typed. willremove any digits typed. If no digits are displayed, will return to the Clock Menu.The date change is recorded in the history.Time: Change the time. The time is entered in HH.MM.SS format. Each section of thetime must be separated by a dot. All times are in 24 hour format. Press toaccept time typed. will remove any digits typed. If no digits are displayed, will return to the Clock Menu. The new time entered will be sent to all units onthe network, if any. A time change of greater than 5 minutes will be recorded in thearchive.8
MR-2100/2200 Operator’s Manual2.0 Supplementary Information2.1 Condition Codes and Zone NumbersThe History and Archive use the following formats for condition codes and zone numbering.Condition CodeArchive Alarm List DescriptionA ALARM AlarmB bypass BypassC com ComlinkD dupl Duplicate Addressable DeviceE alert Maintenance AlertG ground Ground FaultHHot Key PressedI ilgl Illegal Addressable DeviceJSwitchM msng Missing Addressable DeviceN nofire Non-Fire/Non-ReportingP M.PULL Pull Station AlarmQ abort Releaser AbortR halt Releaser HaltS spv SupervisoryT trbl Trouble or Parameter ChangeU wrong Wrong Device TypeW WFLOW Waterflow AlarmA plus sign (+) refers to a new or on condition, a minus sign (-) refers to a restoral or off condition,and an equal sign (=) refers to a one time event.Zone NumberPPP:ZZ.SSS Format:PPP Control Panel NumberZZ Panel ZonePanelZoneDescriptionPanelZoneDescription0 General Alarm 81 1st Stage Alarm1 Initiating Circuit 1 82 2nd Stage Alarm2 Initiating Circuit 2 83 Switch50 Network Verify 84 Test Mode51 Comlink 1 85 1 Erase Configuration52 Comlink 2 86 3 Change Configuration53 Comlink 3 87 Passcode Tamper54 Comlink 6 88 1 Database Loaded60 Output (bell/releaser) Supervision 89 1 Time/Date Change61 Auxiliary Power Supervision 90 1 Hot Key Activation64 1 Program Checksum 91 1 Memory Overflow65 1 Database Checksum 92 1 Network Reboot66 AC Power 93 1 New Program67 Low Battery 94 1 Network Reboot Required who69 1 Program Restart 95 1 Network Reboot Required why80 2 Privilege Level9
Page 2 and 3: Copyrights and TrademarksThe instal
Page 4 and 5: MR-2100/2200 Operator’s Manualii
Page 6 and 7: MR-2100/2200 Operator’s Manual1.3
Page 8 and 9: MR-2100/2200 Operator’s ManualKey
Page 11: MR-2100/2200 Operator’s ManualThe
Page 15 and 16: MR-2100/2200 Operator’s Manual2.2
Page 17: MR-2100/2200 Operator’s ManualMes

LT-2002 MR-2100_2200 Operator's Manual Rev.0 - Secutron

Create successful ePaper yourself

Delete template?

Save as template?