XC1008D-XC1011D - Emerson Climate Technologies

C16C17C18C34C35C36C1 = Frq1;C2 = CPr1;C3 = CPr1,C4 = Stp,C5 = Fan1;C6 = FAn1;C7 = FAn1;C8 = Frq2;C9 = Cpr2;C10 = Cpr2;C11 = Frq2F;C12 = Fan2;C13 = Fan2;C14 = nuC15 = nuKind of compressors: to set the kind of compressors.SPo = compressors with the same capacity.BtZ = screw compressors like Bitzer, Hanbell, Refcomp etc operation.Frtz = screw compressors like Frascold operation.Valve output polarity - circuit 1: valve polarity: polarity of the outputs for capacity valves. Itdetermines the state of the relays associated with the capacity valves:oP=valve enabled with open contact;cL= valve enabled with closed contact.Valve output polarity - circuit 2: valve polarity: polarity of the outputs for capacity valves. Itdetermines the state of the relays associated with the capacity valves:oP=valve enabled with open contact;cL= valve enabled with closed contact.Kind of gas: set the kind of freon used in the plantr22 = R22; r404= R404A ; 507= R507; 134=134; r717=r717 (ammonia); co2 = CO2; 410 = r410.Setting the kind of gas, the XC1000D can associate the pressure with the matching temperature.Activation time during the switching on of first step (valve of 25%) for Bitzer screwcompressors: (0÷255s): it sets for how long the valve is used during the startup phase.First step enabled during the regulation (switching off phase): it sets if the first step can beused also during normal regulation.NO = first step used only during the start phaseYES = first step used also during normal regulation6.1.2 Regulation (C37-C44)C37 Type of regulation for compressor circuit 1:db = neutral zone, Pb = proportional band.C38 Type of regulation for compressor circuit 2: db = neutral zone, Pb = proportional band.C41 Compressor rotation circuit 1:YES = rotation: the algorithm distributes the working time between loads to ensure even run times.no = fixed sequence: the compressors are enabled and disabled in fixed sequence: first, second etc.C42 Compressor rotation circuit 2:YES = rotation: the algorithm distributes the working time between loads to ensure even run times.no = fixed sequence: the compressors are enabled and disabled in fixed sequence: first, second etc.C43 Fan rotation circuit 1:YES = rotation: the algorithm distributes the working time between loads to ensure even run times.no = fixed sequence: the fans are enabled and disabled in fixed sequence: first, second etc.C44 Fan rotation circuit 2:YES = rotation: the algorithm distributes the working time between loads to ensure even run times.no = fixed sequence: the fans are enabled and disabled in fixed sequence: first, second etc.6.1.3 Display (C45-C46)C45Displaying measurement unit: it sets the measurement unit used for the display and forparameters that are connected to temperature/pressure. In pharentesis other measurement unit.CDEC: °C with decimal point (bar);1592021021 XC1008-1011-1015D GB A5 r.1.5A 12.10.2009 XC1008-1011-1015D 26/66