OpenVMS Cluster Systems - OpenVMS Systems - HP

StorageWorks RAID Array 210 Subsystem
naming devices, 6–13
StorageWorks RAID Array 230 Subsystem
naming devices, 6–13
Stripe sets
shadowed, 6–29
SWAPFILE.SYS, 8–1
Swap files
created by CLUSTER_CONFIG.COM procedure,
8–1
Swap files (SWAPFILE.SYS)
created by CLUSTER_CONFIG.COM procedure,
8–6
SYLOGICALS.COM startup file
cloning system disks, 9–16
clusterwide logical names, 5–12
SYS$COMMON:[SYSMGR] directory
template files, 5–14
SYS$DEVICES.DAT text file, 6–19
SYS$LAVC_DEFINE_NET_COMPONENT
subroutine, E–5
SYS$LAVC_DEFINE_NET_PATH subroutine,
E–7
SYS$LAVC_DISABLE_ANALYSIS subroutine,
E–10
SYS$LAVC_ENABLE_ANALYSIS subroutine,
E–9
SYS$LAVC_START_BUS.MAR subroutine, E–1
SYS$LAVC_STOP_BUS.MAR subroutine, E–3
SYS$LIBRARY system directory, 5–5
SYS$MANAGER:SYCONFIG.COM command
procedure, 5–14
SYS$MANAGER:SYLOGICALS.COM command
procedure, 5–14
SYS$MANAGER:SYPAGSWPFILES.COM
command procedure, 5–14
SYS$MANAGER:SYSECURITY.COM command
procedure, 5–14
SYS$MANAGER:SYSTARTUP_VMS.COM
command procedure, 5–14
SYS$MANAGER system directory, 5–5
SYS$QUEUE_MANAGER.QMAN$JOURNAL file,
7–2
SYS$QUEUE_MANAGER.QMAN$QUEUES file,
7–2
SYS$SPECIFIC directory, 5–5
SYS$SYSROOT logical name, 5–5
SYS$SYSTEM:STARTUP.COM command
procedure, 5–14
SYS$SYSTEM system directory, 5–5
SYSALF.DAT file
authorization elements, 5–19
SYSAP protocol
definition, F–2
use of SCS, 1–5
SYSAPs, 1–5
Index–14
SYSBOOT
SET/CLASS command, 6–18
SYSBOOT.EXE image
renaming before rebooting satellite, 8–40
SYSGEN parameters
See System parameters
SYSMAN (System Management utility)
See System Management utility
SYSMAN utility
/CLUSTER_SHUTDOWN qualifier, 10–10
SHUTDOWN NODE command, 8–37
SYSTARTUP.COM procedures
setting up, 5–15
SYSTARTUP_COM startup file
clusterwide logical names, 5–12
System Application protocol
See SYSAP protocol
System applications (SYSAPs)
See SYSAPs
System Communications Architecture
See SCA
System Communications Services
See SCS
System Dump Analyzer utility (SDA), 1–10
monitoring PEDRIVER, F–13
System management, 1–7
AUTOGEN command procedure, 1–10
operating environments, 5–2
products, 1–8
SYSMAN utility, 1–10
System Dump Analyzer, 1–10
tools for daily operations, 1–7, 1–11
System Management utility (SYSMAN), 1–10
enabling cluster alias operations, 4–16
modifying cluster group data, 10–15
System parameters
ACP_REBLDSYSD, 6–26
adjusting for cluster growth, 9–17
adjusting LRPSIZE parameter, 10–16
adjusting NISCS_MAX_PKTSZ parameter,
10–16
ALLOCLASS, 6–9
caution to prevent data corruption, 8–20, A–7,
A–12
CHECK_CLUSTER, A–1
cluster parameters, A–1 to A–12
CLUSTER_CREDITS, 9–18, A–1
CWCREPRC_ENABLE, A–1
DISK_QUORUM, A–2
DR_UNIT_BASE, A–2
EXPECTED_VOTES, 2–6, 8–11, 8–33, A–2
LOCKDIRWT, 2–14, A–2
LRPSIZE, A–2
MPDEV_AFB_INTVL, A–4
MPDEV_D1, A–4, A–12
MPDEV_ENABLE, A–4