z/VM: CP Planning and Administration - z/VM - IBM

More documents

Recommendations

Info

RDEVICE (Graphic Display Devices)Rdevice 98f Type 3287 /* 3287 printer *//* ... hung off 3274 port 32 */Rdevice 1010 Type 3290 /* 3290 information display on *//* ... port 0 of 3174 control *//* ... unit */Rdevice 1011-101f Type 3190 /* 15 3190s on *//* ... 3174 control unit */Rdevice 200-23c Type 3278, /* 7171 ports looking like */Emulated_3270 yes, /* ... 3278s to CP */Hold yes200 z/VM: CP Planning and Administration
RDEVICE (Impact Printers)RDEVICE Statement (Impact Printers)►► RDEVice rdevrdev-rdevTYpeIMPact_printer32033211NO_SPOOLing▼AFP YesAFP NoCHARS ucsnameCLasses ACLasses classesDEST OFFDEST *►◄(1)▼ DEST destFCB fcbnameFOLDup NoFOLDup YesFOrm STANDARDFOrm formIMAGE_LIBrary imagelibINDex 1INDex nnLIMit NoneLIMit nnnnnnnnnnSEParator YesSEParator NoUNIVERSAL_CHARset NoUNIVERSAL_CHARset YesNotes:1 You cannot specify more than four output destinations.PurposeUse this RDEVICE statement to define the following system-managed,channel-attached impact printers to CP:3203 162623211 23262 4245 42481. Only the 3203 Model 5 is supported.2. 3211 printers are only supported as emulated by other printers.Operandsrdevrdev-rdevis the real device number (or numbers) of the impact printer that you wantdefined. The maximum number of devices allowed within a range is 256. Eachrdev must be a hexadecimal number between X'0000' and X'FFFF'.TYpe IMPact_printerTYpe 3202Chapter 6. The System Configuration File 201
Page 1:
z/VMCP Planning and AdministrationV
Page 4 and 5:
Note:Before using this information
Page 6 and 7:
Chapter 2. Configuring Your System
Page 8 and 9:
SYSTEM_RESIDENCE Statement . . . .
Page 10 and 11:
Chapter 11. Customizing the CP Mess
Page 12 and 13:
LOADDEV Directory Control Statement
Page 14 and 15:
CSELDEV (Optional) . . . . . . . .
Page 16 and 17:
xiv z/VM: CP Planning and Administr
Page 18 and 19:
v How many users you are going to h
Page 20 and 21:
Where to Find More InformationFor m
Page 22 and 23:
v In Chapter 6, “The System Confi
Page 24 and 25:
xxii z/VM: CP Planning and Administ
Page 26 and 27:
2 z/VM: CP Planning and Administrat
Page 28 and 29:
Overviewv The logo configuration fi
Page 30 and 31:
OverviewThe MACHINE operand on the
Page 32 and 33:
Overviewv Define a list of CP-owned
Page 34 and 35:
OverviewThere are two ways to defin
Page 36 and 37:
Overviewv Define spooled unit recor
Page 38 and 39:
14 z/VM: CP Planning and Administra
Page 40 and 41:
Page 42 and 43:
STATUS Statement . . . . . . . . .
Page 44 and 45:
Returning to Non-CSE Operation . .
Page 46 and 47:
Page 48 and 49:
Configuring Your SystemNote: Althou
Page 50 and 51:
Configuring Your Systemsense ID req
Page 52 and 53:
Configuring Your SystemLogo Process
Page 54 and 55:
Page 56 and 57:
Understanding the CP File SystemLab
Page 58 and 59:
Understanding the CP File SystemThe
Page 60 and 61:
Understanding the CP File Systemcpa
Page 62 and 63:
Using SAPL|||||||||||||||Important
Page 64 and 65:
Using SAPLSCSI boot record to block
Page 66 and 67:
Using SAPLPassing IPL ParametersSTA
Page 68 and 69:
Using SAPLconfiguration of the syst
Page 70 and 71:
Defining I/O DevicesUnsupportedDevi
Page 72 and 73:
Defining I/O DevicesTable 3. Config
Page 74 and 75:
Defining I/O Devicesv 9034 ESCON Co
Page 76 and 77:
System Configuration FileTable 7. S
Page 78 and 79:
System Configuration FileTable 7. S
Page 80 and 81:
System Configuration FileFeatures,R
Page 82 and 83:
System Configuration FileALTERNATE_
Page 84 and 85:
System Configuration FileASSOCIATE
Page 86 and 87:
System Configuration Filev Specify
Page 88 and 89:
System Configuration FileASSOCIATE
Page 90 and 91:
System Configuration Fileb. Load th
Page 92 and 93:
System Configuration FileLINE_DELet
Page 94 and 95:
System Configuration FileCP_ACCESS
Page 96 and 97:
System Configuration FileCP_ADDON_I
Page 98 and 99:
System Configuration Filethe specif
Page 100 and 101:
System Configuration FileCPXLOAD St
Page 102 and 103:
System Configuration Filespecial ch
Page 104 and 105:
System Configuration FileExamples1.
Page 106 and 107:
System Configuration FileSet SUBCmd
Page 108 and 109:
System Configuration FileDEFINE COM
Page 110 and 111:
System Configuration FileThe QUERY
Page 112 and 113:
System Configuration File6. To chan
Page 114 and 115:
System Configuration FileDEFINE DIA
Page 116 and 117:
System Configuration FileVPROTgives
Page 118 and 119:
DEFINE EXITDEFINE EXIT Statement►
Page 120 and 121:
DEFINE EXITExamples1. To define an
Page 122 and 123:
DEFINE LANMAXCONN maxconnsets the m
Page 124 and 125:
DEFINE VSWITCHDEFINE VSWITCH Statem
Page 126 and 127:
DEFINE VSWITCHUsageNotesPRIrouterin
Page 128 and 129:
DEFINE VSWITCHThe PORTNAME operand
Page 130 and 131:
DEVICESNOTACCEPTedtells CP not to a
Page 132 and 133:
DEVICESchanges on any of these devi
Page 134 and 135:
DISABLE COMMAND/CMDDISABLE COMMAND
Page 136 and 137:
DISABLE DIAGNOSEDISABLE DIAGNOSE St
Page 138 and 139:
DISABLE EXITSDISABLE EXITS Statemen
Page 140 and 141:
DISTRIBUTEDISTRIBUTE StatementForma
Page 142 and 143:
DRAIN (Disk)DRAIN (Disk) Statement
Page 144 and 145:
DRAIN (Disk)Drain DASD 0700-07ff Al
Page 146 and 147:
EDEVICE|||2105specifies that IBM 21
Page 148 and 149:
EMERGENCY_MESSAGE_CONSOLESEMERGENCY
Page 150 and 151:
ENABLE COMMAND / CMDENABLE COMMAND
Page 152 and 153:
ENABLE DIAGNOSEENABLE DIAGNOSE Stat
Page 154 and 155:
ENABLE EXITSENABLE EXITS Statement
Page 156 and 157:
ENFORCE_BY_VOLidENFORCE_BY_VOLid St
Page 158 and 159:
EQUATEThe statement starting with S
Page 160 and 161:
FEATURESFEATURES Statement►► FE
Page 162 and 163:
FEATURESENABle:ENABleAUTO_WARM_IPLC
Page 164 and 165:
FEATURESOperandsAUTO_IPLdefines the
Page 166 and 167:
FEATURESchange the privilege classe
Page 168 and 169:
FEATURES||||||||||||SET_DYNamic_i/o
Page 170 and 171:
FEATURESUsageNotesInfiniteindicates
Page 172 and 173:
FEATURES|v Clear all temporary disk
Page 174 and 175: FORM_DEFAULTFORM_DEFAULT Statement
Page 176 and 177: HOT_IO_RATEHOT_IO_RATE Statement►
Page 178 and 179: HOT_IO_RATE4. If you need to change
Page 180 and 181: IMBED2. If you have several systems
Page 182 and 183: IODFIODF Statement►► IODF IODF
Page 184 and 185: JOURNALINGJOURNALING Statement►
Page 186 and 187: JOURNALINGACCount After nnn Attempt
Page 188 and 189: LOGO_CONFIGLOGO_CONFIG Statement►
Page 190 and 191: MODIFY COMMAND / CMDvariable subcom
Page 192 and 193: MODIFY COMMAND / CMDFor more inform
Page 194 and 195: MODIFY DIAGNOSEEPName nametells CP
Page 196 and 197: MODIFY EXITMODIFY EXIT Statement►
Page 198 and 199: MODIFY EXITv X'8000' to X'EFFF' are
Page 200 and 201: MODIFY PRIV_CLASSESMODIFY PRIV_CLAS
Page 202 and 203: MODIFY VSWITCHMODIFY VSWITCH Statem
Page 204 and 205: OPERATOR_CONSOLESOPERATOR_CONSOLES
Page 206 and 207: PRINTER_TITLEPRINTER_TITLE Statemen
Page 208 and 209: PRIV_CLASSESPRIV_CLASSES Statement
Page 210 and 211: PRODUCTPRODUCT Statement►►PRODI
Page 212 and 213: RDEVICERDEVICE StatementPurposeUse
Page 214 and 215: RDEVICE (Card Punches)RDEVICE State
Page 216 and 217: RDEVICE - Card ReadersRDEVICE State
Page 218 and 219: RDEVICE (Communication Controllers)
Page 220 and 221: RDEVICE (DASD)UsageNotesMDCtells CP
Page 222 and 223: RDEVICE (Graphic Display Devices)MO
Page 226 and 227: RDEVICE (Impact Printers)TYpe 3211t
Page 228 and 229: RDEVICE (Impact Printers)Examples1.
Page 230 and 231: RDEVICE (Special Devices)Rdevice 02
Page 232 and 233: RDEVICE (Tape Units)3. To define a
Page 234 and 235: RDEVICE (Unsupported Devices)PRINTe
Page 236 and 237: RDEVICE (3800 Printers)RDEVICE Stat
Page 238 and 239: RDEVICE (3800 Printers)Notes:1. Aft
Page 240 and 241: RDEVICE (3800 Printers)/* *//* Note
Page 242 and 243: SAYlogical record length of a conso
Page 244 and 245: START (Disk)START (Disk) Statement
Page 246 and 247: STORAGESTORAGE Statement►► STOR
Page 248 and 249: STORAGE4. The SCMBK operand will be
Page 250 and 251: SYSTEM_IDENTIFIERSYSTEM_IDENTIFIER
Page 252 and 253: SYSTEM_IDENTIFIER_DEFAULTSYSTEM_IDE
Page 254 and 255: SYSTEM_RESIDENCESYSTEM_RESIDENCE St
Page 256 and 257: SYSTEM_USERIDSSYSTEM_USERIDS Statem
Page 258 and 259: SYSTEM_USERIDS2. CP creates system
Page 260 and 261: THROTTLETHROTTLE Statement►► TH
Page 262 and 263: TIMEZONE_BOUNDARYzone 02:00:00 is i
Page 264 and 265: TIMEZONE_DEFINITIONv EST as 5 hours
Page 266 and 267: TOLERATE_CONFIG_ERRORSare not toler
Page 268 and 269: TRANSLATE_TABLEFor more information
Page 270 and 271: TRANSLATE_TABLE504B4B4B 4B4B4B4B 4B
Page 272 and 273: USER_DEFAULTSUSER_DEFAULTS System C
Page 274 and 275:
USER_DEFAULTSUsageNotesCPLANGUAGE l
Page 276 and 277:
USER_VOLUME_EXCLUDE2. Dedicated dev
Page 278 and 279:
USER_VOLUME_INCLUDEIt satisfies a U
Page 280 and 281:
USER_VOLUME_LISTIt is explicitly li
Page 282 and 283:
VMLANUsageNotesACNT|ACCOUNTing USER
Page 284 and 285:
XLINK_DEVICE_DEFAULTSTYPe 3390tells
Page 286 and 287:
XLINK_DEVICE_DEFAULTS2. The default
Page 288 and 289:
XLINK_SYSTEM_INCLUDEXLINK_SYSTEM_IN
Page 290 and 291:
XLINK_VOLUME_EXCLUDEXLINK_VOLUME_EX
Page 292 and 293:
XLINK_VOLUME_INCLUDEXLINK_VOLUME_IN
Page 294 and 295:
XLINK_VOLUME_INCLUDETable 9. Map Re
Page 296 and 297:
XSPOOL_SYSTEMUsageNotesNote: If you
Page 298 and 299:
XSPOOL_XLIST_INPUTXSPOOL_XLIST_INPU
Page 300 and 301:
XSPOOL_XLIST_OUTPUTXSPOOL_XLIST_OUT
Page 302 and 303:
XSPOOL_XLIST_OUTPUT278 z/VM: CP Pla
Page 304 and 305:
Logo Configuration File/*----------
Page 306 and 307:
Logo Configuration FileWithin these
Page 308 and 309:
Logo Configuration FilePF (program
Page 310 and 311:
CHOOSE_LOGOOperandsDEFaulttells CP
Page 312 and 313:
CHOOSE_LOGOUsageNoteswithin a strin
Page 314 and 315:
CHOOSE_LOGOspecifies that CP should
Page 316 and 317:
ONLINE_MESSAGEONLINE_MESSAGE Statem
Page 318 and 319:
STATUSUsageNotesRUNning stringident
Page 320 and 321:
Setting Up SVMs2. Determine the wri
Page 322 and 323:
Setting Up SVMs5. Make sure there i
Page 324 and 325:
Setting Up SVMsColumn Contents1-8 U
Page 326 and 327:
Setting Up SVMs79-80 Accounting car
Page 328 and 329:
Setting Up SVMsAccounting Records f
Page 330 and 331:
Setting Up SVMsAccounting Records f
Page 332 and 333:
Setting Up SVMsColumnContents1-8 VM
Page 334 and 335:
Setting Up SVMs80 Accounting record
Page 336 and 337:
Setting Up SVMs5. IBM reserves the
Page 338 and 339:
Setting Up SVMsThe CP accounting fu
Page 340 and 341:
Setting Up SVMsv At CP generation t
Page 342 and 343:
Setting Up SVMsSetting Up Virtual M
Page 344 and 345:
Setting Up SVMsv Make sure the syst
Page 346 and 347:
Setting Up SVMsCCLOAD requires acce
Page 348 and 349:
Setting Up SVMsThe PVM configuratio
Page 350 and 351:
Setting Up SVMsservice pool manager
Page 352 and 353:
328 z/VM: CP Planning and Administr
Page 354 and 355:
Planning for SNA/CCSEstablishing th
Page 356 and 357:
Planning for SNA/CCSStarting the VT
Page 358 and 359:
CSE Overviewsystems for minidisks o
Page 360 and 361:
Planning CSE- TRANSFER.Some feature
Page 362 and 363:
Planning CSEFor this to be effectiv
Page 364 and 365:
Planning CSEPlacing of the CSE Area
Page 366 and 367:
Planning CSENote: When using differ
Page 368 and 369:
Planning CSE/*---------------------
Page 370 and 371:
Enabling CSEv The entry in the dire
Page 372 and 373:
Enabling CSE/**********************
Page 374 and 375:
Enabling CSEppfnameis the name of t
Page 376 and 377:
Enabling CSESTART LINE vdev1START L
Page 378 and 379:
Enabling CSE►► START CSEcom sys
Page 380 and 381:
Enabling CSEsmsg cvm drop line vdev
Page 382 and 383:
Enabling CSEmechanisms, or any of t
Page 384 and 385:
Administering CSEThe CKD cross syst
Page 386 and 387:
Administering CSE┌─────
Page 388 and 389:
Administering CSErepresents cylinde
Page 390 and 391:
Administering CSEComplexes with 338
Page 392 and 393:
Administering CSEWithin the CSE com
Page 394 and 395:
Administering CSENote: If a reader
Page 396 and 397:
Administering CSEspooling is done u
Page 398 and 399:
Customizing Messages2. HCPPROLG, HC
Page 400 and 401:
Customizing MessagesValueMeaningX'8
Page 402 and 403:
Customizing Messagesprocessed. You
Page 404 and 405:
Security and Integrity in z/VMISPF
Page 406 and 407:
Security and Integrity in z/VMRefer
Page 408 and 409:
Security and Integrity in z/VMUsing
Page 410 and 411:
Security and Integrity in z/VMv Rej
Page 412 and 413:
Security and Integrity in z/VMA rea
Page 414 and 415:
Security and Integrity in z/VMrequi
Page 416 and 417:
Security and Integrity in z/VMValid
Page 418 and 419:
Security and Integrity in z/VMSET T
Page 420 and 421:
Security and Integrity in z/VMDirec
Page 422 and 423:
Security and Integrity in z/VMPagin
Page 424 and 425:
Security and Integrity in z/VMADDRE
Page 426 and 427:
Page 428 and 429:
Using the Stand-Alone Dump UtilityT
Page 430 and 431:
Using the Stand-Alone Dump Utility3
Page 432 and 433:
Using the Stand-Alone Dump UtilityP
Page 434 and 435:
Using the Stand-Alone Dump Utility4
Page 436 and 437:
Creating and Modifying Image Librar
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
CCW TranslationUnsupported Devices
Page 454 and 455:
CCW TranslationSEEKREQ=NOSEEKREQ=YE
Page 456 and 457:
Page 458 and 459:
Redefining Command Privilege Classe
Page 460 and 461:
Page 462 and 463:
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Creating and Updating a User Direct
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
ACCOUNTACCOUNT Directory Control St
Page 482 and 483:
ACIGROUPACIGROUP Directory Control
Page 484 and 485:
APPCPASSmultiple user ID and passwo
Page 486 and 487:
CLASSCLASS Directory Control Statem
Page 488 and 489:
CONSOLEUsageNotesOBServerindicates
Page 490 and 491:
CPUUsageNotesbase processors, this
Page 492 and 493:
CRYPTOCRYPTO Directory Control Stat
Page 494 and 495:
CRYPTOUsage NotesExamples1. Only on
Page 496 and 497:
DASDOPTDASDOPT Directory Control St
Page 498 and 499:
DASDOPTTable 22. DASD Control Level
Page 500 and 501:
DATEFORMAT3. If the user’s defaul
Page 502 and 503:
DEDICATE||||||||||||Operandsvdevis
Page 504 and 505:
DIRECTORYDIRECTORY Directory Contro
Page 506 and 507:
DIRECTORY1. To specify that:v The F
Page 508 and 509:
D8ONECMDUsage NotesExamples1. If yo
Page 510 and 511:
GLOBALOPTSGLOBALOPTS Directory Cont
Page 512 and 513:
IOPRIORITYIOPRIORITY Directory Cont
Page 514 and 515:
IPLIPL Directory Control Statement
Page 516 and 517:
IPLExamples1. To specify that CP is
Page 518 and 519:
IUCVglobal resource, or gateway res
Page 520 and 521:
IUCVRESANYallows the virtual machin
Page 522 and 523:
IUCVstatement, a user cannot issue
Page 524 and 525:
LINKLINK Directory Control Statemen
Page 526 and 527:
LINKUsageNotesE Authorizes the virt
Page 528 and 529:
LOADLOAD Directory Control Statemen
Page 530 and 531:
LOADExamplesTo define a directory i
Page 532 and 533:
LOADDEVdefined using the HEX option
Page 534 and 535:
MACHINEMACHINE Directory Control St
Page 536 and 537:
MAXSTORAGEMAXSTORAGE Directory Cont
Page 538 and 539:
MDISKcylblk3380 3390 9336 FB-512FB-
Page 540 and 541:
MDISKappears the ability to use the
Page 542 and 543:
MDISK518 z/VM: CP Planning and Admi
Page 544 and 545:
MDISKv Is accessible only in multip
Page 546 and 547:
MDISKexecuted, the real Search ID u
Page 548 and 549:
MINIOPTMINIOPT Directory Control St
Page 550 and 551:
MINIOPT- If DFLTOFF and MINIOPT is
Page 552 and 553:
NAMESAVE4. To access a private copy
Page 554 and 555:
NICDEFTable 24. Number (Decimal) of
Page 556 and 557:
NOPDATANOPDATA Directory Control St
Page 558 and 559:
OPTIONCFUSERindicates that the user
Page 560 and 561:
OPTIONthe ability of other users to
Page 562 and 563:
OPTION4. You may not specify OPTION
Page 564 and 565:
POOLPOOL Directory Control Statemen
Page 566 and 567:
POSIXGLIST2. A group’s gid or gna
Page 568 and 569:
POSIXGROUPExamples1. To define a PO
Page 570 and 571:
POSIXINFOUsageNotesPOSIX group name
Page 572 and 573:
POSIXOPTPOSIXOPT Directory Control
Page 574 and 575:
POSIXOPTuse the following POSIXOPT
Page 576 and 577:
PROFILE3. STDEVOPT, POSIXINFO, and
Page 578 and 579:
SCREENhilight value can be:BLInkbli
Page 580 and 581:
SHAREUsageNotesLIMITSoftspecifies t
Page 582 and 583:
SPECIALbe defined. For a MSGPROC ,
Page 584 and 585:
SPECIALUsage NotesExamples1. When a
Page 586 and 587:
SPOOLSPOOL Directory Control Statem
Page 588 and 589:
SPOOLDATCKNODATCKspecifies whether
Page 590 and 591:
STDEVOPTSTDEVOPT Directory Control
Page 592 and 593:
STORAGESTORAGE Directory Control St
Page 594 and 595:
SYSAFFINUsageNoteswith this user ID
Page 596 and 597:
USERUSER Directory Control Statemen
Page 598 and 599:
USERFurthermore, this user ID may n
Page 600 and 601:
USERUsageNoteswithout consideration
Page 602 and 603:
XAUTOLOGXAUTOLOG Directory Control
Page 604 and 605:
XCONFIGXCONFIG Directory Control St
Page 606 and 607:
XCONFIGXconfig AccessList ALsize 12
Page 608 and 609:
XCONFIGUsageNotesSHAREtells CP that
Page 610 and 611:
XSTORE3. Multiple users may have Ex
Page 612 and 613:
Sharing DASD between One Virtual Ma
Page 614 and 615:
Real Storage Planning and Administr
Page 616 and 617:
Expanded Storage Planning and Admin
Page 618 and 619:
Page 620 and 621:
Page 622 and 623:
Page 624 and 625:
Page 626 and 627:
Page 628 and 629:
Allocating DASD SpaceLater in this
Page 630 and 631:
Allocating DASD Spacev Other custom
Page 632 and 633:
Allocating DASD Spaceppc+4+((nvl+11
Page 634 and 635:
Allocating DASD Spacecylinders = 26
Page 636 and 637:
Allocating DASD SpaceTable 29. 3390
Page 638 and 639:
Allocating DASD Space- NLS files.Al
Page 640 and 641:
Allocating DASD Spaceneed to perfor
Page 642 and 643:
Allocating DASD Space3390 contains
Page 644 and 645:
DASD Sharingdefined to use any of t
Page 646 and 647:
DASD Sharingis CMS, use the Shared
Page 648 and 649:
DASD SharingReal Machine 1 Real Mac
Page 650 and 651:
DASD Sharing2. Define the DASD as s
Page 652 and 653:
DASD SharingCachedDASDguest will ha
Page 654 and 655:
DASD SharingOr, you would code the
Page 656 and 657:
DASD SharingFigure 38 on page 631 i
Page 658 and 659:
DASD Sharing634 z/VM: CP Planning a
Page 660 and 661:
Defining and Managing SCSI FCP Disk
Page 662 and 663:
Defining and Managing SCSI FCP Disk
Page 664 and 665:
Page 666 and 667:
DRAWLOGODRAWLOGO►► DRAWLOGO fnL
Page 668 and 669:
Defining Your SystemTable 33. HCPSY
Page 670 and 671:
CSELDEVCSELDEV (Optional)►►labe
Page 672 and 673:
CSELDEV4. The default parameters fo
Page 674 and 675:
CSELVOL INCLUDECSELVOL INCLUDE (Opt
Page 676 and 677:
CSELVOL INCLUDETable 34 shows the m
Page 678 and 679:
CSESYSParametersCSEID=establishes t
Page 680 and 681:
CSESYSUsageNotescomplex. If they ar
Page 682 and 683:
CSETRACECSETRACE (Optional)►►la
Page 684 and 685:
CSEUSERv Enter a CP QUERY userid or
Page 686 and 687:
SYSACNT2. To specify DISKACNT as th
Page 688 and 689:
SYSCPVOLSYSCPVOL (Required)►►la
Page 690 and 691:
SYSCPVOLc. In the SYSCPVOL list, yo
Page 692 and 693:
SYSENDSYSEND (Required)►►labelS
Page 694 and 695:
SYSEREP2. To specify MISSEREP as th
Page 696 and 697:
SYSEXCLMigration AidsYou can achiev
Page 698 and 699:
SYSFCNUsageNotesDFLT=Gspecifies the
Page 700 and 701:
SYSFORMUsage NotesExamplesThe userf
Page 702 and 703:
SYSIDParametersUsageNotessystemidis
Page 704 and 705:
SYSINCLSYSINCL (Optional)►►labe
Page 706 and 707:
SYSJRLSYSJRL (Optional)►► label
Page 708 and 709:
SYSJRLreached causes a type 06 acco
Page 710 and 711:
SYSMAXUSYSMAXU (Optional)►►labe
Page 712 and 713:
SYSOPR4. When the primary system op
Page 714 and 715:
SYSOPTS2. If you specify SENSE=NO,
Page 716 and 717:
SYSPCLASv If the operating system r
Page 718 and 719:
SYSRESThe variable nunits is a numb
Page 720 and 721:
SYSRES- All TDISK space after IPL w
Page 722 and 723:
SYSSTOREExamples1. To specify 16 MB
Page 724 and 725:
SYSSYMP2. To specify DISKSYMP as th
Page 726 and 727:
SYSTIMEExamples1. If your installat
Page 728 and 729:
SYSUVOL“USER_VOLUME_LIST Statemen
Page 730 and 731:
Defining I/O Devices5. You must not
Page 732 and 733:
AFP PrintersCommon Control Unit (CC
Page 734 and 735:
AFP Printers3820 Printer►►label
Page 736 and 737:
Display PrintersPrinters Attached t
Page 738 and 739:
Display PrintersATTENTION: It is no
Page 740 and 741:
Impact PrintersImpact Printers►
Page 742 and 743:
Impact PrintersNote: If you specify
Page 744 and 745:
3800 PrintersCP System-Managed 3800
Page 746 and 747:
3800 PrintersParametersDEVNO=rdevsp
Page 748 and 749:
3800 PrintersNote: If you specify C
Page 750 and 751:
Unit Record DevicesUnit Record Devi
Page 752 and 753:
Unit Record Devicesvalue can be a d
Page 754 and 755:
Unit Record Devicesv CLASS=NONE spe
Page 756 and 757:
Display Terminals and AdaptersDispl
Page 758 and 759:
Display Terminals and Adapters3270-
Page 760 and 761:
Display Terminals and AdaptersUsage
Page 762 and 763:
Display Terminals and AdaptersTelep
Page 764 and 765:
Display Terminals and Adapters5080
Page 766 and 767:
Tape UnitsTape Units742 z/VM: CP Pl
Page 768 and 769:
Tape UnitsRDEVICE DEVNO=0422,DEVTYP
Page 770 and 771:
DASDDASD Types►►labelRDEVICE DE
Page 772 and 773:
DASDv QUERY DASDFW.Note: The only w
Page 774 and 775:
DASDUsage Notes1. During device ini
Page 776 and 777:
Communication Devices2701 Data Adap
Page 778 and 779:
Communication Devices3705, 3725, an
Page 780 and 781:
Communication DevicesNote: If you n
Page 782 and 783:
Communication DevicesMODEL=modelnos
Page 784 and 785:
Communication DevicesCTCA, 3088 Mul
Page 786 and 787:
Dynamic Switching Devices9032 and 9
Page 788 and 789:
Unsupported DevicesDISPLAYDisplay m
Page 790 and 791:
RIOGENRIOGEN►►labelRIOGENCONS=D
Page 792 and 793:
RIOGEN768 z/VM: CP Planning and Adm
Page 794 and 795:
Configuration Guide for PrintersTab
Page 796 and 797:
Configuration Guide for Printers772
Page 798 and 799:
Device Class and Type CodesTYP3250
Page 800 and 801:
Device Class and Type CodesM380001
Page 802 and 803:
Stand-Alone Dump Formats┌──
Page 804 and 805:
Stand-Alone Dump FormatsPrinter For
Page 806 and 807:
and other programs (including this
Page 808 and 809:
Page 810 and 811:
Page 812 and 813:
Endz/VM: OpenExtensions Callable Se
Page 814 and 815:
Page 816 and 817:
3270_PRINTER operandRDEVICE stateme
Page 818 and 819:
ACCOUNT user directory control stat
Page 820 and 821:
card punch (continued)spooled, virt
Page 822 and 823:
communication controller (continued
Page 824 and 825:
create (continued)image librarymap
Page 826 and 827:
DASD (Direct Access Storage Device)
Page 828 and 829:
directory (continued)password autho
Page 830 and 831:
escape characterdefault 67setting 6
Page 832 and 833:
example (continued)SYSSTORE macro 6
Page 834 and 835:
GATEWAY operandSYSTEM_IDENTIFIER st
Page 836 and 837:
impact printer (continued)defining
Page 838 and 839:
MMAC operandDEFINE CMD statement 86
Page 840 and 841:
onlinebringing specified devices 10
Page 842 and 843:
privilege classes (continued)author
Page 844 and 845:
eal storageadministration 7, 589con
Page 846 and 847:
SHARE_SPOOL operandXSPOOL_SYSTEM st
Page 848 and 849:
statement (continued)IODF 53, 158JO
Page 850 and 851:
system configuration file (continue
Page 852 and 853:
TDSK operand (continued)START state
Page 854 and 855:
user (continued)directory control s
Page 856 and 857:
warning (continued)removed (continu
Page 858:
Readers’ Comments — We’d Like
Page 861:
Spine information: z/VM CP Planning
show all

z/VM: CP Planning and Administration - z/VM - IBM

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?