z/VM: CP Planning and Administration - z/VM - IBM

More documents

Recommendations

Info

CPUUsageNotesbase processors, this option overrides the CPUID operand on the OPTIONstatement. For nonbase processors, it overrides the CPU ID of the base CPU.For more information about the the CPUID operand on the OPTION statement,see page 533.DEDicateNODEDicatespecifies whether this virtual processor is to be dedicated at LOGON time to areal processor.If NODEDICATE is specified, this virtual processor is not to be dedicated to areal processor. It has the same effect as entering the UNDEDICATE commandfor this virtual CPU. NODEDICATE is the default.CRYPtospecifies whether a virtual Integrated Cryptographic Facility (ICRF) should bedefined automatically for the virtual CPU at LOGON time. If you define thevirtual CPU as CRYPTO and no real ICRF is installed on the real processor atLOGON time, CP issues a message that indicates that no real crypto facility isinstalled.1. If the virtual processor is to be dedicated, CP tries to dedicate a real processorthat has the same facilities as the virtual processor. For example, CP tries tomatch a real processor with a vector facility to a virtual CPU with a definedvirtual vector facility, and a real processor without a vector facility to a virtualCPU without a defined virtual vector facility.2. The order of virtual machine CPU dedication is the base CPU first, with anyother nonbase processors following in the same order as the CPU entries in theuser’s directory entry.3. If DEDICATE is specified on the CPU statement and dedication occurs as aresult of this, and if the processor becomes no longer dedicated later for anyreason, rededication does not occur.4. The DEDICATE and UNDEDICATE commands override this statement.5. The directory entry contains conflicting statements if multiple processors aredefined on CPU statements and OPTION CONCEAL is specified. An informationmessage is issued, the CONCEAL option is rejected, and directory processingcontinues.6. The protected application environment is supported only for virtual machinesrunning a single processor. If this virtual machine is running a multiprocessorconfiguration, the SET CONCEAL ON command is rejected.7. Use of the ICRF must be authorized by the CRYPTO statement if the CRYPTOoperand is to be specified. The default is to not define an ICRF.8. A maximum of two virtual crypto facilities may be defined for a virtual machine.If a virtual machine user has more than two CPU statements with CRYPTOspecified, CP defines virtual crypto facilities for only the first two CPUstatements specifying crypto. CP issues an error message to indicate that themaximum number of cryptos have already been defined.ExamplesTo define a vector-enabled base CPU at address X'3F', with a CPU ID of X'00003F',use the following CPU statement:CPU 3f vector base CPUid 00003f466 z/VM: CP Planning and Administration
CPUTo define a crypto-enabled base CPU at address X'DE', with a CPU ID ofX'0000DE', use the following CPU statement:CPU de novector base CPUid 0000de CryptoChapter 17. Creating and Updating a User Directory 467
Page 1:
z/VMCP Planning and AdministrationV
Page 4 and 5:
Note:Before using this information
Page 6 and 7:
Chapter 2. Configuring Your System
Page 8 and 9:
SYSTEM_RESIDENCE Statement . . . .
Page 10 and 11:
Chapter 11. Customizing the CP Mess
Page 12 and 13:
LOADDEV Directory Control Statement
Page 14 and 15:
CSELDEV (Optional) . . . . . . . .
Page 16 and 17:
xiv z/VM: CP Planning and Administr
Page 18 and 19:
v How many users you are going to h
Page 20 and 21:
Where to Find More InformationFor m
Page 22 and 23:
v In Chapter 6, “The System Confi
Page 24 and 25:
xxii z/VM: CP Planning and Administ
Page 26 and 27:
2 z/VM: CP Planning and Administrat
Page 28 and 29:
Overviewv The logo configuration fi
Page 30 and 31:
OverviewThe MACHINE operand on the
Page 32 and 33:
Overviewv Define a list of CP-owned
Page 34 and 35:
OverviewThere are two ways to defin
Page 36 and 37:
Overviewv Define spooled unit recor
Page 38 and 39:
14 z/VM: CP Planning and Administra
Page 40 and 41:
Page 42 and 43:
STATUS Statement . . . . . . . . .
Page 44 and 45:
Returning to Non-CSE Operation . .
Page 46 and 47:
Page 48 and 49:
Configuring Your SystemNote: Althou
Page 50 and 51:
Configuring Your Systemsense ID req
Page 52 and 53:
Configuring Your SystemLogo Process
Page 54 and 55:
Page 56 and 57:
Understanding the CP File SystemLab
Page 58 and 59:
Understanding the CP File SystemThe
Page 60 and 61:
Understanding the CP File Systemcpa
Page 62 and 63:
Using SAPL|||||||||||||||Important
Page 64 and 65:
Using SAPLSCSI boot record to block
Page 66 and 67:
Using SAPLPassing IPL ParametersSTA
Page 68 and 69:
Using SAPLconfiguration of the syst
Page 70 and 71:
Defining I/O DevicesUnsupportedDevi
Page 72 and 73:
Defining I/O DevicesTable 3. Config
Page 74 and 75:
Defining I/O Devicesv 9034 ESCON Co
Page 76 and 77:
System Configuration FileTable 7. S
Page 78 and 79:
System Configuration FileTable 7. S
Page 80 and 81:
System Configuration FileFeatures,R
Page 82 and 83:
System Configuration FileALTERNATE_
Page 84 and 85:
System Configuration FileASSOCIATE
Page 86 and 87:
System Configuration Filev Specify
Page 88 and 89:
System Configuration FileASSOCIATE
Page 90 and 91:
System Configuration Fileb. Load th
Page 92 and 93:
System Configuration FileLINE_DELet
Page 94 and 95:
System Configuration FileCP_ACCESS
Page 96 and 97:
System Configuration FileCP_ADDON_I
Page 98 and 99:
System Configuration Filethe specif
Page 100 and 101:
System Configuration FileCPXLOAD St
Page 102 and 103:
System Configuration Filespecial ch
Page 104 and 105:
System Configuration FileExamples1.
Page 106 and 107:
System Configuration FileSet SUBCmd
Page 108 and 109:
System Configuration FileDEFINE COM
Page 110 and 111:
System Configuration FileThe QUERY
Page 112 and 113:
System Configuration File6. To chan
Page 114 and 115:
System Configuration FileDEFINE DIA
Page 116 and 117:
System Configuration FileVPROTgives
Page 118 and 119:
DEFINE EXITDEFINE EXIT Statement►
Page 120 and 121:
DEFINE EXITExamples1. To define an
Page 122 and 123:
DEFINE LANMAXCONN maxconnsets the m
Page 124 and 125:
DEFINE VSWITCHDEFINE VSWITCH Statem
Page 126 and 127:
DEFINE VSWITCHUsageNotesPRIrouterin
Page 128 and 129:
DEFINE VSWITCHThe PORTNAME operand
Page 130 and 131:
DEVICESNOTACCEPTedtells CP not to a
Page 132 and 133:
DEVICESchanges on any of these devi
Page 134 and 135:
DISABLE COMMAND/CMDDISABLE COMMAND
Page 136 and 137:
DISABLE DIAGNOSEDISABLE DIAGNOSE St
Page 138 and 139:
DISABLE EXITSDISABLE EXITS Statemen
Page 140 and 141:
DISTRIBUTEDISTRIBUTE StatementForma
Page 142 and 143:
DRAIN (Disk)DRAIN (Disk) Statement
Page 144 and 145:
DRAIN (Disk)Drain DASD 0700-07ff Al
Page 146 and 147:
EDEVICE|||2105specifies that IBM 21
Page 148 and 149:
EMERGENCY_MESSAGE_CONSOLESEMERGENCY
Page 150 and 151:
ENABLE COMMAND / CMDENABLE COMMAND
Page 152 and 153:
ENABLE DIAGNOSEENABLE DIAGNOSE Stat
Page 154 and 155:
ENABLE EXITSENABLE EXITS Statement
Page 156 and 157:
ENFORCE_BY_VOLidENFORCE_BY_VOLid St
Page 158 and 159:
EQUATEThe statement starting with S
Page 160 and 161:
FEATURESFEATURES Statement►► FE
Page 162 and 163:
FEATURESENABle:ENABleAUTO_WARM_IPLC
Page 164 and 165:
FEATURESOperandsAUTO_IPLdefines the
Page 166 and 167:
FEATURESchange the privilege classe
Page 168 and 169:
FEATURES||||||||||||SET_DYNamic_i/o
Page 170 and 171:
FEATURESUsageNotesInfiniteindicates
Page 172 and 173:
FEATURES|v Clear all temporary disk
Page 174 and 175:
FORM_DEFAULTFORM_DEFAULT Statement
Page 176 and 177:
HOT_IO_RATEHOT_IO_RATE Statement►
Page 178 and 179:
HOT_IO_RATE4. If you need to change
Page 180 and 181:
IMBED2. If you have several systems
Page 182 and 183:
IODFIODF Statement►► IODF IODF
Page 184 and 185:
JOURNALINGJOURNALING Statement►
Page 186 and 187:
JOURNALINGACCount After nnn Attempt
Page 188 and 189:
LOGO_CONFIGLOGO_CONFIG Statement►
Page 190 and 191:
MODIFY COMMAND / CMDvariable subcom
Page 192 and 193:
MODIFY COMMAND / CMDFor more inform
Page 194 and 195:
MODIFY DIAGNOSEEPName nametells CP
Page 196 and 197:
MODIFY EXITMODIFY EXIT Statement►
Page 198 and 199:
MODIFY EXITv X'8000' to X'EFFF' are
Page 200 and 201:
MODIFY PRIV_CLASSESMODIFY PRIV_CLAS
Page 202 and 203:
MODIFY VSWITCHMODIFY VSWITCH Statem
Page 204 and 205:
OPERATOR_CONSOLESOPERATOR_CONSOLES
Page 206 and 207:
PRINTER_TITLEPRINTER_TITLE Statemen
Page 208 and 209:
PRIV_CLASSESPRIV_CLASSES Statement
Page 210 and 211:
PRODUCTPRODUCT Statement►►PRODI
Page 212 and 213:
RDEVICERDEVICE StatementPurposeUse
Page 214 and 215:
RDEVICE (Card Punches)RDEVICE State
Page 216 and 217:
RDEVICE - Card ReadersRDEVICE State
Page 218 and 219:
RDEVICE (Communication Controllers)
Page 220 and 221:
RDEVICE (DASD)UsageNotesMDCtells CP
Page 222 and 223:
RDEVICE (Graphic Display Devices)MO
Page 224 and 225:
RDEVICE (Graphic Display Devices)Rd
Page 226 and 227:
RDEVICE (Impact Printers)TYpe 3211t
Page 228 and 229:
RDEVICE (Impact Printers)Examples1.
Page 230 and 231:
RDEVICE (Special Devices)Rdevice 02
Page 232 and 233:
RDEVICE (Tape Units)3. To define a
Page 234 and 235:
RDEVICE (Unsupported Devices)PRINTe
Page 236 and 237:
RDEVICE (3800 Printers)RDEVICE Stat
Page 238 and 239:
RDEVICE (3800 Printers)Notes:1. Aft
Page 240 and 241:
RDEVICE (3800 Printers)/* *//* Note
Page 242 and 243:
SAYlogical record length of a conso
Page 244 and 245:
START (Disk)START (Disk) Statement
Page 246 and 247:
STORAGESTORAGE Statement►► STOR
Page 248 and 249:
STORAGE4. The SCMBK operand will be
Page 250 and 251:
SYSTEM_IDENTIFIERSYSTEM_IDENTIFIER
Page 252 and 253:
SYSTEM_IDENTIFIER_DEFAULTSYSTEM_IDE
Page 254 and 255:
SYSTEM_RESIDENCESYSTEM_RESIDENCE St
Page 256 and 257:
SYSTEM_USERIDSSYSTEM_USERIDS Statem
Page 258 and 259:
SYSTEM_USERIDS2. CP creates system
Page 260 and 261:
THROTTLETHROTTLE Statement►► TH
Page 262 and 263:
TIMEZONE_BOUNDARYzone 02:00:00 is i
Page 264 and 265:
TIMEZONE_DEFINITIONv EST as 5 hours
Page 266 and 267:
TOLERATE_CONFIG_ERRORSare not toler
Page 268 and 269:
TRANSLATE_TABLEFor more information
Page 270 and 271:
TRANSLATE_TABLE504B4B4B 4B4B4B4B 4B
Page 272 and 273:
USER_DEFAULTSUSER_DEFAULTS System C
Page 274 and 275:
USER_DEFAULTSUsageNotesCPLANGUAGE l
Page 276 and 277:
USER_VOLUME_EXCLUDE2. Dedicated dev
Page 278 and 279:
USER_VOLUME_INCLUDEIt satisfies a U
Page 280 and 281:
USER_VOLUME_LISTIt is explicitly li
Page 282 and 283:
VMLANUsageNotesACNT|ACCOUNTing USER
Page 284 and 285:
XLINK_DEVICE_DEFAULTSTYPe 3390tells
Page 286 and 287:
XLINK_DEVICE_DEFAULTS2. The default
Page 288 and 289:
XLINK_SYSTEM_INCLUDEXLINK_SYSTEM_IN
Page 290 and 291:
XLINK_VOLUME_EXCLUDEXLINK_VOLUME_EX
Page 292 and 293:
XLINK_VOLUME_INCLUDEXLINK_VOLUME_IN
Page 294 and 295:
XLINK_VOLUME_INCLUDETable 9. Map Re
Page 296 and 297:
XSPOOL_SYSTEMUsageNotesNote: If you
Page 298 and 299:
XSPOOL_XLIST_INPUTXSPOOL_XLIST_INPU
Page 300 and 301:
XSPOOL_XLIST_OUTPUTXSPOOL_XLIST_OUT
Page 302 and 303:
XSPOOL_XLIST_OUTPUT278 z/VM: CP Pla
Page 304 and 305:
Logo Configuration File/*----------
Page 306 and 307:
Logo Configuration FileWithin these
Page 308 and 309:
Logo Configuration FilePF (program
Page 310 and 311:
CHOOSE_LOGOOperandsDEFaulttells CP
Page 312 and 313:
CHOOSE_LOGOUsageNoteswithin a strin
Page 314 and 315:
CHOOSE_LOGOspecifies that CP should
Page 316 and 317:
ONLINE_MESSAGEONLINE_MESSAGE Statem
Page 318 and 319:
STATUSUsageNotesRUNning stringident
Page 320 and 321:
Setting Up SVMs2. Determine the wri
Page 322 and 323:
Setting Up SVMs5. Make sure there i
Page 324 and 325:
Setting Up SVMsColumn Contents1-8 U
Page 326 and 327:
Setting Up SVMs79-80 Accounting car
Page 328 and 329:
Setting Up SVMsAccounting Records f
Page 330 and 331:
Setting Up SVMsAccounting Records f
Page 332 and 333:
Setting Up SVMsColumnContents1-8 VM
Page 334 and 335:
Setting Up SVMs80 Accounting record
Page 336 and 337:
Setting Up SVMs5. IBM reserves the
Page 338 and 339:
Setting Up SVMsThe CP accounting fu
Page 340 and 341:
Setting Up SVMsv At CP generation t
Page 342 and 343:
Setting Up SVMsSetting Up Virtual M
Page 344 and 345:
Setting Up SVMsv Make sure the syst
Page 346 and 347:
Setting Up SVMsCCLOAD requires acce
Page 348 and 349:
Setting Up SVMsThe PVM configuratio
Page 350 and 351:
Setting Up SVMsservice pool manager
Page 352 and 353:
328 z/VM: CP Planning and Administr
Page 354 and 355:
Planning for SNA/CCSEstablishing th
Page 356 and 357:
Planning for SNA/CCSStarting the VT
Page 358 and 359:
CSE Overviewsystems for minidisks o
Page 360 and 361:
Planning CSE- TRANSFER.Some feature
Page 362 and 363:
Planning CSEFor this to be effectiv
Page 364 and 365:
Planning CSEPlacing of the CSE Area
Page 366 and 367:
Planning CSENote: When using differ
Page 368 and 369:
Planning CSE/*---------------------
Page 370 and 371:
Enabling CSEv The entry in the dire
Page 372 and 373:
Enabling CSE/**********************
Page 374 and 375:
Enabling CSEppfnameis the name of t
Page 376 and 377:
Enabling CSESTART LINE vdev1START L
Page 378 and 379:
Enabling CSE►► START CSEcom sys
Page 380 and 381:
Enabling CSEsmsg cvm drop line vdev
Page 382 and 383:
Enabling CSEmechanisms, or any of t
Page 384 and 385:
Administering CSEThe CKD cross syst
Page 386 and 387:
Administering CSE┌─────
Page 388 and 389:
Administering CSErepresents cylinde
Page 390 and 391:
Administering CSEComplexes with 338
Page 392 and 393:
Administering CSEWithin the CSE com
Page 394 and 395:
Administering CSENote: If a reader
Page 396 and 397:
Administering CSEspooling is done u
Page 398 and 399:
Customizing Messages2. HCPPROLG, HC
Page 400 and 401:
Customizing MessagesValueMeaningX'8
Page 402 and 403:
Customizing Messagesprocessed. You
Page 404 and 405:
Security and Integrity in z/VMISPF
Page 406 and 407:
Security and Integrity in z/VMRefer
Page 408 and 409:
Security and Integrity in z/VMUsing
Page 410 and 411:
Security and Integrity in z/VMv Rej
Page 412 and 413:
Security and Integrity in z/VMA rea
Page 414 and 415:
Security and Integrity in z/VMrequi
Page 416 and 417:
Security and Integrity in z/VMValid
Page 418 and 419:
Security and Integrity in z/VMSET T
Page 420 and 421:
Security and Integrity in z/VMDirec
Page 422 and 423:
Security and Integrity in z/VMPagin
Page 424 and 425:
Security and Integrity in z/VMADDRE
Page 426 and 427:
Page 428 and 429:
Using the Stand-Alone Dump UtilityT
Page 430 and 431:
Using the Stand-Alone Dump Utility3
Page 432 and 433:
Using the Stand-Alone Dump UtilityP
Page 434 and 435:
Using the Stand-Alone Dump Utility4
Page 436 and 437:
Creating and Modifying Image Librar
Page 438 and 439:
Creating and Modifying Image Librar
Page 440 and 441: Creating and Modifying Image Librar
Page 452 and 453: CCW TranslationUnsupported Devices
Page 454 and 455: CCW TranslationSEEKREQ=NOSEEKREQ=YE
Page 456 and 457: 432 z/VM: CP Planning and Administr
Page 458 and 459: Redefining Command Privilege Classe
Page 472 and 473: Creating and Updating a User Direct
Page 480 and 481: ACCOUNTACCOUNT Directory Control St
Page 482 and 483: ACIGROUPACIGROUP Directory Control
Page 484 and 485: APPCPASSmultiple user ID and passwo
Page 486 and 487: CLASSCLASS Directory Control Statem
Page 488 and 489: CONSOLEUsageNotesOBServerindicates
Page 492 and 493: CRYPTOCRYPTO Directory Control Stat
Page 494 and 495: CRYPTOUsage NotesExamples1. Only on
Page 496 and 497: DASDOPTDASDOPT Directory Control St
Page 498 and 499: DASDOPTTable 22. DASD Control Level
Page 500 and 501: DATEFORMAT3. If the user’s defaul
Page 502 and 503: DEDICATE||||||||||||Operandsvdevis
Page 504 and 505: DIRECTORYDIRECTORY Directory Contro
Page 506 and 507: DIRECTORY1. To specify that:v The F
Page 508 and 509: D8ONECMDUsage NotesExamples1. If yo
Page 510 and 511: GLOBALOPTSGLOBALOPTS Directory Cont
Page 512 and 513: IOPRIORITYIOPRIORITY Directory Cont
Page 514 and 515: IPLIPL Directory Control Statement
Page 516 and 517: IPLExamples1. To specify that CP is
Page 518 and 519: IUCVglobal resource, or gateway res
Page 520 and 521: IUCVRESANYallows the virtual machin
Page 522 and 523: IUCVstatement, a user cannot issue
Page 524 and 525: LINKLINK Directory Control Statemen
Page 526 and 527: LINKUsageNotesE Authorizes the virt
Page 528 and 529: LOADLOAD Directory Control Statemen
Page 530 and 531: LOADExamplesTo define a directory i
Page 532 and 533: LOADDEVdefined using the HEX option
Page 534 and 535: MACHINEMACHINE Directory Control St
Page 536 and 537: MAXSTORAGEMAXSTORAGE Directory Cont
Page 538 and 539: MDISKcylblk3380 3390 9336 FB-512FB-
Page 540 and 541:
MDISKappears the ability to use the
Page 542 and 543:
MDISK518 z/VM: CP Planning and Admi
Page 544 and 545:
MDISKv Is accessible only in multip
Page 546 and 547:
MDISKexecuted, the real Search ID u
Page 548 and 549:
MINIOPTMINIOPT Directory Control St
Page 550 and 551:
MINIOPT- If DFLTOFF and MINIOPT is
Page 552 and 553:
NAMESAVE4. To access a private copy
Page 554 and 555:
NICDEFTable 24. Number (Decimal) of
Page 556 and 557:
NOPDATANOPDATA Directory Control St
Page 558 and 559:
OPTIONCFUSERindicates that the user
Page 560 and 561:
OPTIONthe ability of other users to
Page 562 and 563:
OPTION4. You may not specify OPTION
Page 564 and 565:
POOLPOOL Directory Control Statemen
Page 566 and 567:
POSIXGLIST2. A group’s gid or gna
Page 568 and 569:
POSIXGROUPExamples1. To define a PO
Page 570 and 571:
POSIXINFOUsageNotesPOSIX group name
Page 572 and 573:
POSIXOPTPOSIXOPT Directory Control
Page 574 and 575:
POSIXOPTuse the following POSIXOPT
Page 576 and 577:
PROFILE3. STDEVOPT, POSIXINFO, and
Page 578 and 579:
SCREENhilight value can be:BLInkbli
Page 580 and 581:
SHAREUsageNotesLIMITSoftspecifies t
Page 582 and 583:
SPECIALbe defined. For a MSGPROC ,
Page 584 and 585:
SPECIALUsage NotesExamples1. When a
Page 586 and 587:
SPOOLSPOOL Directory Control Statem
Page 588 and 589:
SPOOLDATCKNODATCKspecifies whether
Page 590 and 591:
STDEVOPTSTDEVOPT Directory Control
Page 592 and 593:
STORAGESTORAGE Directory Control St
Page 594 and 595:
SYSAFFINUsageNoteswith this user ID
Page 596 and 597:
USERUSER Directory Control Statemen
Page 598 and 599:
USERFurthermore, this user ID may n
Page 600 and 601:
USERUsageNoteswithout consideration
Page 602 and 603:
XAUTOLOGXAUTOLOG Directory Control
Page 604 and 605:
XCONFIGXCONFIG Directory Control St
Page 606 and 607:
XCONFIGXconfig AccessList ALsize 12
Page 608 and 609:
XCONFIGUsageNotesSHAREtells CP that
Page 610 and 611:
XSTORE3. Multiple users may have Ex
Page 612 and 613:
Sharing DASD between One Virtual Ma
Page 614 and 615:
Real Storage Planning and Administr
Page 616 and 617:
Expanded Storage Planning and Admin
Page 618 and 619:
Page 620 and 621:
Page 622 and 623:
Page 624 and 625:
Page 626 and 627:
Page 628 and 629:
Allocating DASD SpaceLater in this
Page 630 and 631:
Allocating DASD Spacev Other custom
Page 632 and 633:
Allocating DASD Spaceppc+4+((nvl+11
Page 634 and 635:
Allocating DASD Spacecylinders = 26
Page 636 and 637:
Allocating DASD SpaceTable 29. 3390
Page 638 and 639:
Allocating DASD Space- NLS files.Al
Page 640 and 641:
Allocating DASD Spaceneed to perfor
Page 642 and 643:
Allocating DASD Space3390 contains
Page 644 and 645:
DASD Sharingdefined to use any of t
Page 646 and 647:
DASD Sharingis CMS, use the Shared
Page 648 and 649:
DASD SharingReal Machine 1 Real Mac
Page 650 and 651:
DASD Sharing2. Define the DASD as s
Page 652 and 653:
DASD SharingCachedDASDguest will ha
Page 654 and 655:
DASD SharingOr, you would code the
Page 656 and 657:
DASD SharingFigure 38 on page 631 i
Page 658 and 659:
DASD Sharing634 z/VM: CP Planning a
Page 660 and 661:
Defining and Managing SCSI FCP Disk
Page 662 and 663:
Defining and Managing SCSI FCP Disk
Page 664 and 665:
Page 666 and 667:
DRAWLOGODRAWLOGO►► DRAWLOGO fnL
Page 668 and 669:
Defining Your SystemTable 33. HCPSY
Page 670 and 671:
CSELDEVCSELDEV (Optional)►►labe
Page 672 and 673:
CSELDEV4. The default parameters fo
Page 674 and 675:
CSELVOL INCLUDECSELVOL INCLUDE (Opt
Page 676 and 677:
CSELVOL INCLUDETable 34 shows the m
Page 678 and 679:
CSESYSParametersCSEID=establishes t
Page 680 and 681:
CSESYSUsageNotescomplex. If they ar
Page 682 and 683:
CSETRACECSETRACE (Optional)►►la
Page 684 and 685:
CSEUSERv Enter a CP QUERY userid or
Page 686 and 687:
SYSACNT2. To specify DISKACNT as th
Page 688 and 689:
SYSCPVOLSYSCPVOL (Required)►►la
Page 690 and 691:
SYSCPVOLc. In the SYSCPVOL list, yo
Page 692 and 693:
SYSENDSYSEND (Required)►►labelS
Page 694 and 695:
SYSEREP2. To specify MISSEREP as th
Page 696 and 697:
SYSEXCLMigration AidsYou can achiev
Page 698 and 699:
SYSFCNUsageNotesDFLT=Gspecifies the
Page 700 and 701:
SYSFORMUsage NotesExamplesThe userf
Page 702 and 703:
SYSIDParametersUsageNotessystemidis
Page 704 and 705:
SYSINCLSYSINCL (Optional)►►labe
Page 706 and 707:
SYSJRLSYSJRL (Optional)►► label
Page 708 and 709:
SYSJRLreached causes a type 06 acco
Page 710 and 711:
SYSMAXUSYSMAXU (Optional)►►labe
Page 712 and 713:
SYSOPR4. When the primary system op
Page 714 and 715:
SYSOPTS2. If you specify SENSE=NO,
Page 716 and 717:
SYSPCLASv If the operating system r
Page 718 and 719:
SYSRESThe variable nunits is a numb
Page 720 and 721:
SYSRES- All TDISK space after IPL w
Page 722 and 723:
SYSSTOREExamples1. To specify 16 MB
Page 724 and 725:
SYSSYMP2. To specify DISKSYMP as th
Page 726 and 727:
SYSTIMEExamples1. If your installat
Page 728 and 729:
SYSUVOL“USER_VOLUME_LIST Statemen
Page 730 and 731:
Defining I/O Devices5. You must not
Page 732 and 733:
AFP PrintersCommon Control Unit (CC
Page 734 and 735:
AFP Printers3820 Printer►►label
Page 736 and 737:
Display PrintersPrinters Attached t
Page 738 and 739:
Display PrintersATTENTION: It is no
Page 740 and 741:
Impact PrintersImpact Printers►
Page 742 and 743:
Impact PrintersNote: If you specify
Page 744 and 745:
3800 PrintersCP System-Managed 3800
Page 746 and 747:
3800 PrintersParametersDEVNO=rdevsp
Page 748 and 749:
3800 PrintersNote: If you specify C
Page 750 and 751:
Unit Record DevicesUnit Record Devi
Page 752 and 753:
Unit Record Devicesvalue can be a d
Page 754 and 755:
Unit Record Devicesv CLASS=NONE spe
Page 756 and 757:
Display Terminals and AdaptersDispl
Page 758 and 759:
Display Terminals and Adapters3270-
Page 760 and 761:
Display Terminals and AdaptersUsage
Page 762 and 763:
Display Terminals and AdaptersTelep
Page 764 and 765:
Display Terminals and Adapters5080
Page 766 and 767:
Tape UnitsTape Units742 z/VM: CP Pl
Page 768 and 769:
Tape UnitsRDEVICE DEVNO=0422,DEVTYP
Page 770 and 771:
DASDDASD Types►►labelRDEVICE DE
Page 772 and 773:
DASDv QUERY DASDFW.Note: The only w
Page 774 and 775:
DASDUsage Notes1. During device ini
Page 776 and 777:
Communication Devices2701 Data Adap
Page 778 and 779:
Communication Devices3705, 3725, an
Page 780 and 781:
Communication DevicesNote: If you n
Page 782 and 783:
Communication DevicesMODEL=modelnos
Page 784 and 785:
Communication DevicesCTCA, 3088 Mul
Page 786 and 787:
Dynamic Switching Devices9032 and 9
Page 788 and 789:
Unsupported DevicesDISPLAYDisplay m
Page 790 and 791:
RIOGENRIOGEN►►labelRIOGENCONS=D
Page 792 and 793:
RIOGEN768 z/VM: CP Planning and Adm
Page 794 and 795:
Configuration Guide for PrintersTab
Page 796 and 797:
Configuration Guide for Printers772
Page 798 and 799:
Device Class and Type CodesTYP3250
Page 800 and 801:
Device Class and Type CodesM380001
Page 802 and 803:
Stand-Alone Dump Formats┌──
Page 804 and 805:
Stand-Alone Dump FormatsPrinter For
Page 806 and 807:
and other programs (including this
Page 808 and 809:
Page 810 and 811:
Page 812 and 813:
Endz/VM: OpenExtensions Callable Se
Page 814 and 815:
Page 816 and 817:
3270_PRINTER operandRDEVICE stateme
Page 818 and 819:
ACCOUNT user directory control stat
Page 820 and 821:
card punch (continued)spooled, virt
Page 822 and 823:
communication controller (continued
Page 824 and 825:
create (continued)image librarymap
Page 826 and 827:
DASD (Direct Access Storage Device)
Page 828 and 829:
directory (continued)password autho
Page 830 and 831:
escape characterdefault 67setting 6
Page 832 and 833:
example (continued)SYSSTORE macro 6
Page 834 and 835:
GATEWAY operandSYSTEM_IDENTIFIER st
Page 836 and 837:
impact printer (continued)defining
Page 838 and 839:
MMAC operandDEFINE CMD statement 86
Page 840 and 841:
onlinebringing specified devices 10
Page 842 and 843:
privilege classes (continued)author
Page 844 and 845:
eal storageadministration 7, 589con
Page 846 and 847:
SHARE_SPOOL operandXSPOOL_SYSTEM st
Page 848 and 849:
statement (continued)IODF 53, 158JO
Page 850 and 851:
system configuration file (continue
Page 852 and 853:
TDSK operand (continued)START state
Page 854 and 855:
user (continued)directory control s
Page 856 and 857:
warning (continued)removed (continu
Page 858:
Readers’ Comments — We’d Like
Page 861:
Spine information: z/VM CP Planning
show all

z/VM: CP Planning and Administration - z/VM - IBM

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?