Phase 4 – Wire L.T. Solid State ( Static) Whole Current ... - WBSEDCL

(e) Colour of meter box Grey/Off White(f) Meter mounting Arrangement Suitable for mounting of any make ofmeter (broadly as per the Drawing)(g) Box Mounting Arrangement 4 Nos. Holes(h) Hinges 2Nos. Concealed hinges(i) Incoming & Out going Cable holes 2 Nos, holes having 40mm dia andbottom entry. High grade doublecompression MS Cable glands fixedon both sides by check nuts to beprovided.TESTING :ANNEXURE -VII1. Sample selected from first lot should be tested at Govt. approved independent test house forcompliance of performance parameters as given in GTP including material identification to becarried out by CIPET/IR Spectrometry.2. The test report should be submitted to WBSEDCL before completion of order.3. Inspection of each lot, sampling plans for test: 1 nos. selected randomly from lot for testing atworks.Sl.Test Requirement for moulded meter boxReference Standardsno.(a) Marking IS:14772(b) Dimensions & construction IS:14772(c) Heat Deflection Temperature (Min. 150°C) IS:13411(d) Spirit Burner Test (Self Extinguishing) IS:4249(e) Melting Point (Does Not Melt up to 400 deg. C.) IS:1336038