to download the Shinko ACS-13A manual in PDF format

11.4 Alarm actionHigh limit alarmA1 hysteresisA1 hysteresisLow limit alarmHigh/Low limits alarmA1 hysteresisAlarmactionONONONOFFOFFOFFA1 set point SV+ A1 set point A1 set point SV + A1 set pointA1 set point SV A1 set pointsettingsettingsettingHigh/Low limit range alarm Process high alarm Process low alarmA1 hysteresisA1 hysteresisA1 hysteresisAlarmactionONONONOFFA1 set point SV A1 set pointsettingHigh limit alarm with standbyA1 hysteresisOFFLow limit alarm with standbyA1 hysteresisA1 set pointOFFA1 set pointHigh/Low limit alarm with standbyA1 hysteresisAlarmactionONONONOFFA1 set point SVsetting+ A1 set pointOFFA1 set pointSVsetting+ A1 set pointOFFA1 set pointSVsettingA1 set point: Standby functions.“A1” means Alarm 1. For Alarm 2, read “A2” for “A1”.EV1 indicator is for Alarm 1, and EV2 indicator is for Alarm 2.EV1 indicator lights up when output terminals 3 and 4 are connected, and goes off when they are disconnected.EV2 indicator lights up when output terminals 5 and 6 are connected, and goes off when they are disconnected.11.5 OUT2 (Heating/Cooling control) actionControlactionONOFFHeatingactionHeating P-bandSV setting(Cooling P-band)(Coolingaction)ONOFFRelay contactoutput (OUT1)Non-contactvoltage output(OUT1)DC currentoutput (OUT1)777888Cycle action is performed according to deviation.+ 7 + 7+ 712V DC 12/0V DC0V DC- 8 - 8- 8Cycle action is performed according to deviation.+ 7 + 7+ 720mA DC 20 to 4mA DC 4mA DC- 8 - 8- 8Changes continuously according to deviation.Relay contactoutput (OUT2)565656Cycle action is performed according to deviation.Non-contactvoltage output(OUT2)+-560V DC+-512/0V DC6+-512V DC6Cycle action is performed according to deviation.Indicator(O1)Indicator(O2)LitUnlitUnlitLit: Alternates between ON (lit) and OFF (unlit).: Represents Heating control action.: Represents Cooling control action.18