12.07.2015 Views

Myson Lo-Line Fan Convector Installation Guide.pdf - BHL.co.uk

Myson Lo-Line Fan Convector Installation Guide.pdf - BHL.co.uk

Myson Lo-Line Fan Convector Installation Guide.pdf - BHL.co.uk

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

04 LO-LINE RC & LO-LINE RC Heater Cooler5.0 PreparationBefore proceeding with the installation, unpack the carton<strong>co</strong>ntents and check against the checklist below:1. LO-LINE or LO-LINE Heater-Cooler unit.2. 15mm isolating valves (1 pair).3. Instruction manual.4. Warranty card.5. Fixing kit (rubber mounts and cable gland).6. Remote <strong>co</strong>ntrol handset.6.0 Fixing● Using the fixing dimensions (see fig. 1), mark the fixing holepositions on the wall.● Drill and plug the wall for No. 8 x 40mm round head woodscrews ensuring that the wall plugs are suitable for the walltype.● Remove the backing from the self-adhesive washers and placeon screws with adhesive side towards the point.● Tighten the screws into the wall leaving about 9mmprojecting.● Press adhesive washers to the wall.62 58 150Dimensions (mm)BMin.eachsideUnit A B C6-4 523 404 359385263C9-6 645 526 48114-10 854 733 68119-15 1138 1018 97470107A150 Min.Fig. 1Remove the outer casing as follows:● Remove the 2 screws from the underside of the unit (see fig. 2).● Lift off the outer case.● Fit chassis on to mounting screws and tighten.Cover Fixing ScrewsFig. 2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!