EQ5 Quick Startup Guide Constant Torque - TECO-Westinghouse ...

More documents

Recommendations

Info

6. Digital Operator PanelThe Digital Operator has various functions for inputting, controlling, and displayingoperations such as frequency setting, run/stop command, confirming and changingfunction data, confirming status, and copying. Please review and become familiarwith each function before attempting to operate the drive. The Digital Operator canbe removed or inserted during inverter operation, however, if it is removed during akeypad operation (e.g., run/stop, frequency setting), the inverter will stop and initiatean alarm.6.1 Overview and NavigationAppearance of Digital OperatorControl Keys(valid during digital operator operation):Used for inverter run and stopLED Monitor:4-digit 7-segment display used to display data suchas setting frequency, output frequency and alarmcode.Auxiliary Information Indication for LED Monitor:Indicates selected units or multiple of themonitored data shown on the LED monitor and isdisplayed on the top line of the LCD monitor. The• symbol indicates selected units or multiplenumber. The symbol ▲ indicates there is an upperscreen not currently displayed.LCD Monitor:Used to display various items of information asoperation status and function data. An operationguide message, which can be scrolled, isdisplayed at the bottom of the LCD monitor. ThisLCD monitor has a backlight feature which turnson when the control power is applied or anykeypad key is pressed. It stays on approximately 5minutes after the last key stroke.Indication on LCD Monitor:Displays one of the following operation status:FWD: Forward operationREV: Reverse operationSTOP: StopDisplays the selected operation mode:REM: Terminal blockLOC: Keypad panelCOMM: Communication terminalJOG: Jogging modeThe symbol ▼ indicates there is a lower screen notcurrently displayed.Run LED :Operation Keys:Used for switching screens, data change,frequency setting, etc.TECO Westinghouse Motor Company EQ5 Quick Start Guide 18
OperationKeySTOPPRGFunctions of Operation KeysMain FunctionUsed to switch the current screen display to the menu screen or switchto the initial display screen in the operation/trip mode.Used to switch the LED monitor or to determine the entered frequency,function code, or data.Used to change data, move the cursor up or down, or scroll the displayscreen.Used to move the cursor horizontally when changing data. When thiskey is pressed with the up or down key, the cursor moves to the nextparameter function block.Used to cancel the current input data and switch the display screen. If analarm occurs, this key is used to reset the trip status (valid only when thealarm mode initial screen is displayed).Used to switch normal operation mode to jogging operation mode or viceversa. The selected mode is displayed on the LCD screen.Switches the operating mode from digital operator to terminal blockoperation (Local / Remote), and vice versa. When these keys areSTOP+ RESET operated, function F01 data is automatically set to 3 if set at 0, orautomatically set to 0 if set from 1 thru 4. The selected mode isdisplayed on the LCD screen.6.2 Programming ParametersOn the program menu screen, select 1. DATA SET. The parameter select screenappears. Select the desired parameter and set value as follows.RUNFWDPRG PRG MENUF / D LED SHIFTThe parameter designations (function codes) consist of alphanumeric characterswith unique alphabetical letters assigned to each parameter group (see table on thenext page).TECO Westinghouse Motor Company EQ5 Quick Start Guide 19
Page 1 and 2: EQ5 SERIESQuick Start Guidefor Cons
Page 3 and 4: EQ5 Drive Quick Start Guide for Con
Page 5 and 6: EQ5 Drive Quick Start Guide for Con
Page 7 and 8: 2. Input Power and Motor Connection
Page 9 and 10: 4. Speed Reference ConfigurationThe
Page 11 and 12: Potentiometer (Speed Pot):GCOM+10VA
Page 13 and 14: To set the frequency reference to 6
Page 15 and 16: 5.2 Run/Stop from External Switch /
Page 17: Command RegisterEQ5 Command Registe
Page 21 and 22: 7. Motor and Application Specific S
Page 23 and 24: 7.3 Torque Boost (F09, Default 0.1)
Page 25: TECO Westinghouse Motor Company EQ5

EQ5 Quick Startup Guide Constant Torque - TECO-Westinghouse ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?