FR-A701 catalog - Mitsubishi Electric Australia

Dedicated cable optionName (type)• For dedicated motorInverter sideSpecifications, Structure, etc.Encoder side connectorN/MS3057-12AFeaturesEarth (Ground) wireF-DPEVSB 12P0.2mmN/MS3106B20-29S60mm11mmLA P clip for earthing (grounding) ashielded cable is provided.StandardSpecificationsCable for encoderFR-V7CBLInverter (FR-A7AP)PA1PA2PB1PB2PZ1PZ2PGSD2mm 2EncoderABCDFGSRAM BN CL PT DK RS EJFH GPositioning keywayN/MS3106B20-29S(As viewed from wiring side)Type Length L (m)FR-V7CBL5 5FR-V7CBL15 15FR-V7CBL30 30(Note) When a cable of 30m length or more is required,consult our sales office.• Cable selection specificationsIf connection cables are not available, make cables according to the following table.When connecting terminals PG and SD to encoder on motor, make parallel connection or use larger gauge cables.(Use cables of 0.2mm 2 to wire other terminals.)Wiring Optional Encoder Cable specifications for terminals PG and SDDistance Dedicated Cable Wiring 0.2mm 2 cables Using larger gauge cable5m or less FR-V7CBL5 2 parallels or more0.4mm 2 or more10m or less2 parallels or moreFR-V7CBL1515m or less4 parallels or more0.75mm 2 or more20m or less4 parallels or moreFR-V7CBL3030m or less6 parallels or more50m or less *Available on request,1.25mm 2 or more6 parallels or more100m or less please consult us.Terminal ConnectionDiagramTerminal SpecificationExplanationOutlineDimensionDrawingsParameterListProtectiveFunctionsEncoder connector (Manufactured by Japan Aviation Electronics Industry,Limited) for referenceStraight Plug N/MS3106B20-29SAngle Plug N/MS3108B20-29S1-1/4-18UNEF-2B 18.3 1-3/16-18UNEF-2A1-1/4-18UNEF-2BPositioning keyway 18.3Optionsφ37.355.6φ239.5Effective screw length33.79.5φ37.3InstructionsCable Clamp N/MS3057-12A1-3/16-18φ23UNEF-2A60.777Effective screw length(Note) This angle type connector is not optional. Please obtain it separately.Warranty1-3/16-18UNEF-2B1.623.810.3φ1037.334.9φ19maximum allowablecable diameterInquiry4(Unit: mm)30