Profile cylinders Euromec, Series 168 - Bosch Rexroth

More documents

Recommendations

Info

Sub-base for direct mounting of Compact 10 or Compact 18 valvesVersion Part no. ValvesizePortnos.1, 4Portnos.3, 5A B C D E F G H K L M Weight[kg](lbs)Upright 0493839705 2518 G 1/8 G 1/8 79 65,5 48 33 18 8 16,5 28,5 11 19 8 0,08(0.176)0493840118 2510 M 7 G 1/8 79 65,5 42,5 33 26 14 23/25 32,5 14 19 13 0,09(0.198)1
Sub-base for direct mounting of Compact 10 or Compact 18 valvesVersion Part no. ValvesizePortnos.1, 4Portnos.3, 5A B C D E F G H K L M Weight[kg](lbs)Lying 0493839802 2518 G 1/8 G 1/8 79 65,5 48 33 18 8 16,5 28,5 11 19 8 0,08(0.176)0493840207 2510 M 7 G 1/8 79 65,5 42,5 33 26 14 23/25 32,5 14 19 13 0,09(0.198)Installation InstructionsConnection: Outlet port 2 of the valve should be connected to the end cover where the base plate is fitted.Outlet port 4 is connected to the opposite end cover with tubing.Inlet port 1 and exhaust ports 3 and 5 are located on one side of the plate.Flow: The maximum flow for a valve mounted on these base plates is somewhat lower than for a valve mounted on a normal subbase.Installation: The plate is fitted directly on the front or rear end cover of the cylinder with a banjo thread.Alternatively one or the other of the two banjo threads (G 1/8 and G 1/4) can be used, depending on the size of the of the cylinder port.For <strong>cylinders</strong> 100–125 mm dia., a reducing nipple for the cylinder connection port G 1/2 is required.Min. strokes: The smallest stroke which a cylinder can have when the base plate is turned towards the opposite end cover and connected withfittings and plastic tubing, 6 mm dia., is 50 mm.1
Page 1: Electric Drivesand ControlsHydralic
Page 5 and 6: Profile cylinders Euromec, Series 1
Page 7: Profile cylinders Euromec, Series 1
Page 16 and 17: Central male trunnionISO MT4, VDMA,
Page 18 and 19: Bearing bracketsPiston Ø Part no.
Page 20 and 21: Rear end cover clevisISO MP0, VDMA,
Page 22 and 23: Rear eye with PTFE bushing (MP4)ISO
Page 24 and 25: Foot mountingPiston Ø Part no. A B
Page 26 and 27: Bearing block with footPistonØPart
Page 28 and 29: Pivot pin with locking rings for "B
Page 30 and 31: Steel bearing brackets* The maximum
Page 32 and 33: Extra nut ISO 4035Thread KKPart no.
Page 34 and 35: Clevis in stainless steel ISO 8140
Page 36 and 37: Ball eye rod end ISO 8139Thread KK
Page 38 and 39: Profile cylinders, series PRA, PRBA
Page 47 and 48: Sensor mounting for Sensors 275Pist
Page 49: Cable holderPiston ØPart no.25-100
Page 53: Bosch Rexroth AGPneumaticsUlmer Str

Profile cylinders Euromec, Series 168 - Bosch Rexroth

Create successful ePaper yourself

Delete template?

Save as template?