Profile cylinders Euromec, Series 168 - Bosch Rexroth

Sub-base for direct mounting of Compact 10 or Compact 18 valvesVersion Part no. ValvesizePortnos.1, 4Portnos.3, 5A B C D E F G H K L M Weight[kg](lbs)Lying 0493839802 2518 G 1/8 G 1/8 79 65,5 48 33 18 8 16,5 28,5 11 19 8 0,08(0.176)0493840207 2510 M 7 G 1/8 79 65,5 42,5 33 26 14 23/25 32,5 14 19 13 0,09(0.198)Installation InstructionsConnection: Outlet port 2 of the valve should be connected to the end cover where the base plate is fitted.Outlet port 4 is connected to the opposite end cover with tubing.Inlet port 1 and exhaust ports 3 and 5 are located on one side of the plate.Flow: The maximum flow for a valve mounted on these base plates is somewhat lower than for a valve mounted on a normal subbase.Installation: The plate is fitted directly on the front or rear end cover of the cylinder with a banjo thread.Alternatively one or the other of the two banjo threads (G 1/8 and G 1/4) can be used, depending on the size of the of the cylinder port.For cylinders 100–125 mm dia., a reducing nipple for the cylinder connection port G 1/2 is required.Min. strokes: The smallest stroke which a cylinder can have when the base plate is turned towards the opposite end cover and connected withfittings and plastic tubing, 6 mm dia., is 50 mm.1