<strong>Profile</strong> <strong>cylinders</strong> <strong>Euromec</strong>, <strong>Series</strong> <strong>168</strong>Non-rotating piston rod, magnetic piston,adjustable cushioning, 32–63 mm dia.Technical Data for <strong>Euromec</strong> Splined (<strong>168</strong>-58)Standard (32–63 mm dia.) ISO 15552 (ISO 6431, VDMA 24562)CNOMO / NFE 49-003-1Working pressure, max.10 bar (145 psi)Ambient temperature range–20 °C to +70 °C (-13 °F to +158 °F)Medium Compressed air ISO 8573-1:2001, class 6-4-3 or lower*Materials Piston rod Hard chromium plated steelPiston rod dowel Steel, black oxidizedPiston rod bushing Steel with a PVDF + PTFE bearing surfaceCylinder body Anodized aluminumEnd coversAluminiumEnd cover screws Surface treated steelWiperPolyurethanePistonAluminumCushioning screw BrassSpline shaftSurface treated steelSpline sleeve PolyamideNutZinc plated steelSealsNitrile rubberApplication areaThis type is intended for applications where the piston rod movement must be secured againstrotation. Note that the piston rod must be held securely in it’s spanner flats when piston rodmountings are tightened so that the maximum permitted torque of the spline shaft is notexceeded.* Particle size ≤ 5 µm, dew point ≤ 3 °C, oil content ≤ 1 mg/m³Technical informationPiston diameter [mm] 32 40 50 63Maximum permitted instantaneous [Nm] 10 15 30 30(in.lbs) (88.51) (132.76) (265.52) (265.52)torque Mv continuous [Nm] 0,6 1 2 2(in.lbs) (5.31) (8.851) (17.70) (17.70)Max. turning play [°] ±1 ±1 ±1 ±1Spanner size X see fig. below [mm] 8 0/-0,2 10 0/-0,2 14 0/-0,2 14 0/-0,2Cylinder weight 0 mm stroke [kg] 0,45 0,76 1,10 1,70(lbs) (0.992) (1.68) (2.43) (3.75)add. per 100 mm [kg] 0,20 0,29 0,45 0,49(lbs) (0.441) (0.639) (0.992) (1.08)Part no.Piston Ø 32 40 50 63Piston rod thread M 10 x 1,25 M 12 x 1,25 M 16 x 1,5 M 16 x 1,5Connection port G1/8 G 1/4 G 1/4 G 3/8Stroke²)25 <strong>168</strong>5803020 <strong>168</strong>5804020 <strong>168</strong>5805020 <strong>168</strong>580602050 <strong>168</strong>5803050 <strong>168</strong>5804050 <strong>168</strong>5805050 <strong>168</strong>580605080 <strong>168</strong>5803080 <strong>168</strong>5804080 <strong>168</strong>5805080 <strong>168</strong>5806080100 <strong>168</strong>5803100 <strong>168</strong>5804100 <strong>168</strong>5805100 <strong>168</strong>5806100125 <strong>168</strong>5803120 <strong>168</strong>5804120 <strong>168</strong>5805120 <strong>168</strong>5806120160 <strong>168</strong>5803160 <strong>168</strong>5804160 <strong>168</strong>5805160 <strong>168</strong>5806160200 <strong>168</strong>5803200 <strong>168</strong>5804200 <strong>168</strong>5805200 <strong>168</strong>5806200250 – <strong>168</strong>5804250 <strong>168</strong>5805250 <strong>168</strong>5806250320 – – <strong>168</strong>5805320 <strong>168</strong>5806320400 – – <strong>168</strong>5805400 <strong>168</strong>5806400500 – – <strong>168</strong>5805500 <strong>168</strong>5806500Optional stroke¹) <strong>168</strong>5803000 <strong>168</strong>5804000 <strong>168</strong>5805000 <strong>168</strong>5806000Rec.max. stroke²) 500 750 990 990¹) When ordering optional stroke the length of the stroke must be given in mm, for example <strong>168</strong>5804000, stroke 185 mm.²) Longer strokes available on request.1
<strong>Profile</strong> <strong>cylinders</strong> <strong>Euromec</strong>, <strong>Series</strong> <strong>168</strong>Non-rotating piston rod, magnetic piston,adjustable cushioning, 32–63 mm dia.Cross section of piston rod threadX = See technical information above.2
- Page 1: Electric Drivesand ControlsHydralic
- Page 5: Profile cylinders Euromec, Series 1
- Page 10 and 11: Profile cylinders Euromec, Series 1
- Page 12 and 13: Profile cylinders Euromec, Series 1
- Page 14 and 15: Profile cylinders Euromec, Series 1
- Page 16 and 17: Central male trunnionISO MT4, VDMA,
- Page 18 and 19: Bearing bracketsPiston Ø Part no.
- Page 20 and 21: Rear end cover clevisISO MP0, VDMA,
- Page 22 and 23: Rear eye with PTFE bushing (MP4)ISO
- Page 24 and 25: Foot mountingPiston Ø Part no. A B
- Page 26 and 27: Bearing block with footPistonØPart
- Page 28 and 29: Pivot pin with locking rings for "B
- Page 30 and 31: Steel bearing brackets* The maximum
- Page 32 and 33: Extra nut ISO 4035Thread KKPart no.
- Page 34 and 35: Clevis in stainless steel ISO 8140
- Page 36 and 37: Ball eye rod end ISO 8139Thread KK
- Page 38 and 39: Profile cylinders, series PRA, PRBA
- Page 40 and 41: Profile cylinders Euromec, Series 1
- Page 42 and 43: Profile cylinders Euromec, Series 1
- Page 44 and 45: Profile cylinders Euromec, Series 1
- Page 47 and 48: Sensor mounting for Sensors 275Pist
- Page 49 and 50: Cable holderPiston ØPart no.25-100
- Page 51 and 52: Sub-base for direct mounting of Com
- Page 53: Bosch Rexroth AGPneumaticsUlmer Str
Change language