Profile cylinders Euromec, Series 168 - Bosch Rexroth

Profile cylinders Euromec, Series 168Low pressure hydraulics, magnetic piston, 25–100 mm dia.Technical Data for Euromec (168-52)Standard (32–100 mm dia.) ISO 15552 (ISO 6431, VDMA 24562)CNOMO / NFE 49-003-1Working pressure, max.10 bar (145 psi)Ambient temperature range–20 °C to +70 °C (-13 °F to +158 °F)MediumFluid, see technical information belowDimensions, see standard cylindersMaterials Piston rod Stainless steel (BS 303 S 31)Piston rod bushing Steel with a PVDF + PTFE bearing surfaceCylinder body Anodized aluminumEnd coversAluminiumEnd cover screws Surface treated steelWiperPolyurethanePiston25–63 mm dia. polyamide,80–100 mm dia. AluminumCushioning screw BrassSealsNitrile rubberNutsZinc plated steelApplication areaThis cylinder type is used when an even and/or very slow piston movement is required even ifthe load varies. A needle valve should be used between the reservoirs in the connectionexample.Technical Information (for further information see section 15)SymbolConnection exampleThe recommended pressure medium for this type is hydraulic fluid.Bearing in mind pressure losses, the viscosity should not exceed 20 mm²/s (2.9° E) atoperating temperature.A suitable hydraulic fluid is oil of the ATF-DEXRON type (Part no. 8982000010) or oilswith an aniline point of 93 °C ±5. (199 °F ±41)For other pressure mediums, please contact your nearest Bosch Rexroth office.Part no.SymbolOrdering exampleWhen ordering please state the series/piston diameter/stroke.Example: Euromec -52/32/300.Longer strokes than rec. max stroke (see standard) are available on request.1