Non binding guide to good practice for implementing Directive

ANNEX H BibliographyNon binding guide to good practice for implementing Directive 2002/44/EC (Vibrations at Work)H.1 EU DIRECTIVESDirective 2002/44/EC of the European Parliamentand of the Council of 25 June 2002 on the minimumhealth and safety requirements regarding the exposureof workers to the risks arising from physical agents(vibration) (sixteenth individual Directive within themeaning of Article 16(1) of Directive 89/391/EEC)Directive 89/391/EEC of the European Parliament andof the Council of 12 June 1989 on the introduction ofmeasures to encourage improvements in the safety andhealth of workers at workDirective 2006/42/EC of the European Parliamentand of the Council of 17 May 2006 on machinery,and amending Directive 95/16/EC (recast)Directive 98/37/EC of the European Parliament andof the Council of 22 June 1998 on the approximationof the laws of the Member States relating to machinery(repealed by Directive 2006/42/EC)Directive 89/686/EEC: Council Directive of 21December 1989 on the approximation of the laws of theMember States relating to personal protective equipmentas amended by Directives 93/68/EEC, 93/95/EECand 96/58/ECCouncil Directive 89/656/EEC of 30 November 1989on the minimum health and safety requirements for theuse by workers of personal protective equipment at theworkplace (third individual directive within the meaningof Article 16 (1) of Directive 89/391/EEC)European Committee for Standardization (1996)Mechanical vibration and shock — Hand-arm vibration— Method for the measurement and evaluation of thevibration transmissibility of gloves at the palm of the handEN ISO 10819:1996European Committee for Standardization (1997)Mechanical vibration — Declaration and verifi cation ofvibration emission valuesEN 12096:1997European Committee for Standardization (2005)Mechanical vibration — Hand-held and hand-guidedmachinery — Principles for evaluation of vibrationemissionEN ISO 20643:2005European Committee for Standardisation (1995) Handarmvibration — Guidelines for vibration hazards reduction— Part 1: Engineering methods by design of machineryCEN/CR 1030-1:1995European Committee for Standardisation (1995) Handarmvibration — Guidelines for vibration hazardsreduction — Part 2: Management measures at theworkplaceCEN/CR 1030-2:1995European Committee for Standardisation (2005)Mechanical vibration — Guideline for the assessment ofexposure to hand-transmitted vibration using availableinformation including that provided by manufacturers ofmachineryCEN/TR 15350: 2005H.2 STANDARDSEuropeanEuropean Committee for Standardization (2001)Mechanical vibration — Measurement andevaluation of human exposure to hand-transmittedvibration — Part 1: General requirementsEN ISO 5349-1:2001.European Committee for Standardization (2001)Mechanical vibration — Measurement and evaluationof human exposure to hand-transmitted vibration — Part2: Practical guidance for measurement at the workplaceEN ISO 5349-2:2001.InternationalInternational Organization for Standardization(2005) Human response to vibration — measuringinstrumentationISO 8041:2005ISO 13091-1:2001 Mechanical vibration —Vibrotactile perception thresholds for the assessment ofnerve dysfunction —Part 1: Methods of measurement atthe fi ngertipsISO 13091-2:2003 Mechanical vibration —Vibrotactile perception thresholds for the assessment ofnerve dysfunction — Part 2: Analysis and interpretationof measurements at the fi ngertips48