Non binding guide to good practice for implementing Directive

ANNEX H BibliographyNon binding guide to good practice for implementing Directive 2002/44/EC (Vibrations at Work)H.1 EU DIRECTIVESDirective 2002/44/EC of the European parliamentand of the Council of 25 June 2002 on the minimumhealth and safety requirements regarding the exposureof workers to the risks arising from physical agents(vibration) (sixteenth individual Directive within themeaning of Article 16(1) of Directive 89/391/EEC)Directive 89/391/EEC of the European parliament andof the Council of 12 June 1989 on the introduction ofmeasures to encourage improvements in the safety andhealth of workers at workDirective 2006/42/EC of the European Parliamentand of the Council of 17 May 2006 on machinery,and amending Directive 95/16/EC (recast)Directive 98/37/EC of the European Parliament andof the Council of 22 June 1998 on the approximationof the laws of the Member States relating to machinery(repealed by Directive 2006/42/EC)Council Directive 90/269/EEC of 29 May 1990 onthe minimum health and safety requirements for the manualhandling of loads where there is a risk particularly ofback injury to workers (fourth individual Directive within themeaning of Article 16(1) of Directive 89/391/EEC)European Committee for Standardization (2003)Mechanical vibration — Testing of mobile machinery inorder to determine the vibration emission value.EN 1032:2003.European Committee for Standardization Mechanicalvibration. Guideline for the assessment of exposureto whole-body vibration of ride on operated earthmovingmachines. Using harmonised data measured byinternational institutes, organisations and manufacturers.CEN/TR First committee draft Munich (March 2005).European Committee for Standardization. Whole-bodyvibration — Guidelines for vibration hazards reduction— Part 1: Engineering methods by design of machinery.CEN/TR 15172-1:2005European Committee for Standardization. Whole-bodyvibration — Guidelines for vibration hazards reduction -Part 2: Management measures at the workplace. CEN/TR 15172-2:2005International Organization for StandardizationMechanical vibration (1992) Mechanical vibration —Laboratory method for evaluating vehicle seat vibration— Part 1: Basic requirements.EN ISO 10326-1:1992H.2 STANDARDSEuropean StandardsEuropean Committee for Standardization (1997)Mechanical vibration - Declaration and verifi cation ofvibration emission values.EN 12096:1997.European Committee for Standardization (2001)Mechanical vibration - Industrial trucks - Laboratoryevaluation and specifi cation of operator seat vibration.EN 13490:2001.European Committee for Standardization (2001)Safety of industrial trucks — Test methods for measuringvibration.EN 13059:2001.European Committee for Standardization (2003)Mechanical vibration — Measurement and calculationof occupational exposure to whole-body vibration withreference to health — Practical guidance.EN 14253:2003.InternationalInternational Organization for Standardization (1997)Guide to the evaluation of human exposure to wholebodymechanical vibration and shock.ISO 2631-1:1997.International Organization for Standardization (2000)Earth moving machinery - laboratory evaluation ofoperator seat vibration.EN ISO 7096:2000.International Organization for Standardization (2003)Agricultural wheeled tractors -- Operator’s seat —Laboratory measurement of transmitted vibrationISO 5007:2003International Organization for Standardization(2005) Human response to vibration — measuringinstrumentation.ISO 8041:2005.International Organization for Standardization (2001)Mechanical vibration - Laboratory method for evaluatingvehicle seat vibration — Part 2: Application to railwayvehicles. ISO 10326-2:2001.100