FM100 Maintenance & Operations Manual - TECO-Westinghouse ...

Fn_26: Frequency Reference: 0.0 - 400HzFn_27: Voltage Reference Offset 0.0 - 100%Fn_28: Voltage Reference Gain 0.0 - 999.9%Fn_29: Positive or Negative Direction 0: Proportional 1: InversePercentage Frequency Setting SignalFn_06 Frequency Upper LimitFn_06 Frequency Upper LimitHz Hz5 4Internal 1 InternalSignalSignal2 3Fn_26 6 Fn_26-Fn =_27 100% +Fn_27 100%Fn_28 Fn_28Curves Fn_26 Fn_27 Fn_28 Fn_29Curve 1 Set Frequency Set 0 Set % 0Curve 2 Set 0 Set 0 Set % 0Curve 3 Set 0 Set % Set % 0Curve 4 Set Frequency Set 0 Set % 1Curve 5 Set 0 Set 0 Set % 1Curve 6 Set 0 Set % Set % 1Note: (Fn_26) (Fn_27) (Fn_28) and (Fn_29) will only work with (Fn_11) set at 1 or 2.(Speed Controlled by Keypad or TM2)Remarks: Signals from a Voltage Reference on TM2 or the Keypad are 0 - 5VDC. The AnalogInput Terminal of TM2 can accept the following signals: 0 - 5VDC, 0 - 10VDC,0 - 20mA. (Fn_28) must be greater than (Fn_27).32