Red Giant Grain Stir-Ator - David Manufacturing Co.

4. Installation ProceduresNOTE: Prior to assembly and installation consult the bin erection manual or manufacturer for any specialunit hanging or support locations.1. All Red Giant Grain Stir-Ators come shipped as follows:One (1) trolley base assembly - 4 Auger and 6 auger unitsOne (1) trolley extension bundle - 6 Auger onlyOne (1) frame rail bundleOne (1) track bundleOne (1) electrical parts box 26" x 26" x 18"Two (2) parts boxes 16" x 16" x 54"2. Before starting to assemble the bin, the complete Red Giant Stir-Ator, less augers, should be laid inthe center of the concrete pad. The top ring and roof assembly of the bin is assembled in the usualway. The Stir-Ator wall track is then installed, as shown in Figure 6A on Page 36. The 5/16" hole forthe track bolts should be drilled or punched, in the bin metal progressively; that is, starting with adouble hole end of a track section, the first hole is drilled or punched and the three (3) hole connector,track bracket and bolt installed. Then, using the holes in the track as a guide, the rest of the boltsand brackets can be installed around the bin. Be sure to have track splices smooth and aligned.(See Figure 11A on Page 82.)ALL RED GIANT STIR-ATORS REQUIRE 12-5/8" SPACING TRACK.Red Giant Stir-Ator4 auger unitFigure 4APNEG-1358 Red Giant Grain Stir-Ator 15