Red Giant Grain Stir-Ator - David Manufacturing Co.

13. Red Giant TroubleshootingAuger Stuck in the Grain1. Latch all spring-loaded tighteners and then slowly engage one belt idler at a time until all augersare started.2. If the above does not work, block up the Red Giant Stir-Ator and turn each auger with a pipe wrenchuntil free. Then repeat item “1”.Caution needs to be exercised when breaking augers loose with a pipe wrenchso that excessive down pull on the Red Giant does not cause wall buckling ortrack failure.3. V-belts from motor to 11-3/8" cast pulley too loose. (See adjustment on Page 83.)90 PNEG-1358 Red Giant Grain Stir-Ator