Snow Blade Operator & Parts Manual - McConnel

ATTACHMENT & OPERATIONAttachment and removal of the machine must always be performed on a firm level site. Ensurebystanders are kept at a safe distance from the machines during the attachment process. Theprocedure for attaching the machine to a Robocut is as follows;Align the Robocut until its mounting plate (a)is centred and parallel to the universal blade’smounting plate (b).Lower mounting plate (a) and move forwardsslowly until the two plates are in contact witheach other.Raise the mounting plate (a) until theuniversal blade’s mounting plate is fullyconnected.Turn off the Robocut and remove the securitykey from the controls.Fix mounting plate (a) to mounting plate (b)using the 6 screws in the location holes (c);secure in place with self-locking nuts.Connect the machines 2 ‘quick release’ hoses(d) to the Robocut’s external connectionpoints (e).Ensure that all connections are connectedcorrectly.Start the Robocut and carefully operate thecontrols to verify they correspond to theircorrect functions.Operating the Machine◄ Angling of the blade to the left or to the rightis controlled by the use of switch ‘f’ indicated.6