Snow Blade Operator & Parts Manual - McConnel

MAINTENANCEWARNING: All maintenance, cleaning and repairing operations must be carried out whenthe engine is turned off and the starting key removed.Before performing any cleaning or maintenance operations, wait for the machine andequipment to cool down.The machine should be inspected on a daily basis prior to work to ensure it is in good workingcondition, the following points should be addressed during routine inspections;Check tightness of nuts and bolts, retighten if required.Check scraper for signs of wear and tear, replace if excessive damage is observed. Check hydraulic hoses and hydraulic connections for signs of damage or leakage,replace any damaged components immediately.Check wheels and wheel components, replaced any worn or damaged items if required.Lubricate machine at the required intervals.Scraper Blade ReplacementTo replace the scraper blade (a);- Loosen and remove clamping screws (b).- Remove blade and fit replacement.- Fix and secure in position by replacing theclamping screws (b).Wheel ReplacementTo replace a wheel (a);- Remove the safety pin (b).- Remove any spacer washers (d)above support (c).- Remove the wheel (a) from support (c).- Remove any spacers (d) from thewheel pin.- Replace the damaged or worn wheelwith a new one.- Repeat the operations described abovein reverse order. Ensure the safety pinhas been inserted properly (b).8