Snow Blade Operator & Parts Manual - McConnel

Height AdjustmentThe blade height is determined by the height position of the caster wheels (a), adjustment ofwhich is controlled by spacer washers (d); washers are placed on the wheel pin either above orbelow the support beam (c) to give the desired height. The wheel units are secured in placewith safety pins (b). Always make sure that the washers are placed in the same positions oneach of the two wheels to ensure the blade works parallel to the ground. See illustrations below.WARNING!This procedure must only be performed with the blade supported and secured so that it cannotfall during adjustment operations on the wheels. Failure to observe this can result in personalinjury and/or damage to the machine.7