PowerLogic ION7550 / ION7650 User Guide - Schneider Electric

Chapter 12 - Logging and TrendingION7550 / ION7650 User Guide6. Click the Channels tab to edit, link and unlink revenue parameters.7. Click the Interval/Depth tab to edit the interval and duration of the revenue log.EnergyDemand Log Screen8. Select the EnergyDemand Log screen to configure Data Recorder #10(EnergyDemand Log).9. Click the Channels tab to edit, link and unlink EnergyDemand log parameters.10. Click the Interval/Depth tab to edit the interval and duration of theEnergyDemand logChanging the Parameters that are LoggedThe meter’s factory configuration logs a comprehensive set of energy, power andharmonics parameters. You cannot change which parameters are logged byconfiguring a setup register. If you are comfortable editing module links, you canchange the logged parameters by linking the output registers you want logged tothe inputs of an Data Recorder module.NOTEAdding or deleting a log’s parameters is an advanced procedure, as it requires changes to links betweenmodules; use the Designer component of ION Enterprise (refer to the Designer section of the online IONEnterprise Help) or ION Setup.Changing Waveform RecordingThe Waveform Recorder modules do not require changes to their default settings.If you want to change the format of the recorded waveforms, refer to theWaveform Recorder module description in the ION Reference.Page 156© 2007 Schneider Electric. All rights reserved.