cb-obs411 electrical mechanical data sheet - SE Spezial-Electronic ...

More documents

Recommendations

Info

connectBlue5.2 Antenna Connector (External antennas)The external antennas are connected to the board through a U.FL connector. Some of the antennas are connected directly to the U.FLconnector of the board and some are connected using an SMA or reversed polarity SMA connector through a short U.FL to SMA orreversed polarity SMA adapter cable. The SMA antenna versions are not allowed for usage in USA and Canada. Instead the reversedpolarity SMA must be used. Other antennas are also available on request (please contact connectBlue for more information).5.2.1 Antenna AccessoriesPart Number cB-ACC-18 / cB-ACC-48NameU.FL to SMA adapter cableConnector U.FL and SMA jack (outer thread and pin receptacle)Cable length 120 mmCable loss Less than 0.5dBCommentThe SMA connector may be mounted in a panel.Not approved for use in the US and Canada.Approved for EU.PartNumberNamecB-ACC-38U.FL to reverse polarity SMA adapter cableConnector U.FL and reverse polarity SMA jack (outer thread and pin)Cable length 120 mmCable loss Less than 0.5dBCommentThe reverse polarity SMA connector may be mounted in apanel.Approved for use in the US, Canada and Europe.Copyright © 2010 connectBlue AB Page 14 of 42
connectBlue5.2.2 AntennasPart Number cB-ACC-16 / cB-ACC-36NameWCR2400-SMA / WCR2400-SMRPManufactureTypePolarizationLaird Technologies / Centurion½ wave dipoleVerticalGain +2.5 dBiSize 100 mm (Straight)ConnectorCommentApprovalSMA plug (inner thread and pin) orReverse Polarity SMA plug (inner thread and pin receptacle)To be mounted on the U.FL to SMA or reverse polarity SMA adapter cable.Both SMA and reverse SMA versions are approved for use in Europe.The SMA version is not approved for use in the US and Canada.The reverse SMA version is approved for use in the US, Canada and Europe.Copyright © 2010 connectBlue AB Page 15 of 42
Page 1 and 2: connectBlueCB-OBS411 ELECTRICAL MEC
Page 3 and 4: connectBlue2 IntroductionThe hardwa
Page 5 and 6: connectBlue2.3 Block DiagramFigure
Page 7 and 8: connectBlue3.1 Pin Numbering3.1.1 J
Page 9 and 10: connectBlue13 - 8 - GREEN/Switch-1
Page 11 and 12: connectBlueR IN_PULL-UPInput signal
Page 13: connectBlue5 Antennas5.1 Surface Mo
Page 17 and 18: connectBluePartNumberNamecB-ACC-17R
Page 19 and 20: connectBlue6 Mechanics6.1 Module Ou
Page 21 and 22: connectBlueFigure 9: Host PCB layou
Page 23 and 24: connectBlueThe modules are produced
Page 25 and 26: connectBlueFor more information ple
Page 27 and 28: connectBlue8.3 FCC and IC Complianc
Page 29 and 30: connectBlue9 Guidelines for Efficie
Page 31 and 32: connectBlue10.2.1.2.2 Module output
Page 33 and 34: connectBlue10.2.2.2 External RS232
Page 35 and 36: connectBlueFigure 17: A complete RS
Page 37 and 38: connectBlueFigure 21: A red LED in
Page 39 and 40: connectBlueFigure 25: No restore sw
Page 41 and 42: connectBlueFigure 30: A reset switc

cb-obs411 electrical mechanical data sheet - SE Spezial-Electronic ...

Create successful ePaper yourself

Delete template?

Save as template?