User Manual - Polaris S.p.A.

More documents

Recommendations

Info

Safety4.11.2004 Rev. 1.12.2.1 Installation tipsCheck that the surface on which the appliance will rest is level and suitable to support itsweight.To ensure proper airflow and avoid any damage to the refrigeration circuit, allow a minimumside clearance of 50 mm (2 inches); do not place the appliance close to heat sources(such as ovens, radiators, etc.) or exposed to direct sunlight and provide suitable insulationfrom walls or floor if they transmit heat.If the appliance has been moved, wait for a while before switching it on again.2.3 Disposing of the appliance (environmental protection)Our appliances contain the refrigerant shown on the corresponding rating plate as perRegulation (EC) No. 2037/2000 of 29 June 2000; in addition, the appliance is composedof reusable or recyclable parts and materials. Therefore, at the end of its lifetime, the applianceshould be delivered to a specific disposal centre. The best method to ensure thatno one will remain trapped inside is to take off the door completely.The appliance must not be disposed of together with household waste and metal scrap.Absolutely avoid damaging the refrigeration circuit, particularly near the heat exchanger.Pic. 2.34
Functional description4.11.2004 Rev. 1.13. Functional description3.1 Intended useThis appliance should only be used to store food and beverages. The manufacturer shallnot be held liable for the consequences resulting from unintended uses of this appliance.Do not store food in direct contact with the structure.Both the appliance’s construction features and the condensing unit’s capacity have beendesigned to store only pre-cooled products. Never place carbonated beverages into thelow-temperature compartment as they may explode. Never place liquids or hot food intothe appliance and do not fill lidded containers to the top.In all appliances there are surfaces subject to frosting. Depending on the model, frost maybe melted away either automatically (automatic defrost) or manually. Never attempt to removefrost using a pointed object because in this way you could irreparably damage theappliance.Do not use any mechanical device or other artificial means to accelerate the defrost process.The Manufacturer declines all responsibility, and the warranty shall be null and void, ifelectrical and/or mechanical alterations are made to the product.The warranty shall also be null and void if the product is tampered with or, in general, incase of alterations not expressly authorised and not made in compliance with the instructionsgiven herein.5
Page 1: FREEZERSA Plus serieBTBTVTYPE: 70,
Page 4 and 5: 4.11.2004 Rev. 1.1
Page 6 and 7: 4.11.2004 Rev.5.7.3 Suggestions ...
Page 8 and 9: General information4.11.2004 Rev. 1
Page 12 and 13: Functional description4.11.2004 Rev
Page 14 and 15: Operating instructions4.11.2004 Rev
Page 16 and 17: Operating instructions4.11.2004 Rev
Page 18 and 19: Installation4.11.2004 Rev. 1.15.3 U
Page 20 and 21: Adjustment instructions4.11.2004 Re
Page 30 and 31: Troubleshooting4.11.2004 Rev. 1.124
Page 32 and 33: Spare parts4.11.2004 Rev. 1.126
Page 44 and 45: Technical specifications4.11.2004 R
Page 46 and 47: Wiring diagram BT, BTV
Page 56 and 57: DICHIARAZIONE DI CONFORMITA’DECLA
Page 60:
M_SPABT_uen11.pdf
show all

User Manual - Polaris S.p.A.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?