Classic Below Ground Supported Slab - Jablite

InstallationSupportTo prevent movement, Jabfloor should be adequately supported along its length.Suitable supports consisting of 25x25mm timber battens are nailed to the sides of the joists. A slight gap willprevent Jabfloor Classic and the timber boards rubbing against each other.Jabfloor ClassicJabfloor Classic should be cut to fit snugly between the joists and should be pushfitted into position, with theends of adjacent boards tightly butted.Chipboard finishWhere chipboard is used as the floor finish it should be Type P5, minimum 18mm-thick for domestic floorapplications and 22mm-thick for non-domestic floor applications, with tongued and grooved edges as describedin BS 7916.Floors | Walls | Roofs Jablite Claymaster Technical Information 25