Classic Below Ground Supported Slab - Jablite

6.2JABFLOOR CLASSIC 100DECLARATION OFPERFORMANCENo: 037885010001 Unique identification code of the product-type: Jabfloor Classic 1002 Type, batch or serial number or any other element Grade EPS 100allowing identification of the construction product asrequired pursuant to Article 11(4) of the CPR:3 Intended use or uses of the construction product, in EPS insulation for use in floor constructionaccordance with the harmonised technical specification,as foreseen by the manufacturer:4 Name, registered trade name or registered trade mark Jablite Ltd, Infinity House,and contact address of the manufacturer as requiredAnderson Way, Belvedere,pursuant to Article 11(5):Kent, DA17 6BG5 Where applicable, name and contact address of the Not Applicableauthorised representative whose mandate covers thetasks specified in Article 12(2):6 System or systems of assessment and verification of AVCP System 3constancy of performance of the construction productas set out in Annex V:7 In case of the declaration of performance of the British Board of Agrément;construction product covered by a harmonised standard: BRE (RtF)- name and number of notified body:- performed: Thermal ConductivityCompressive stress at 10% deformationReaction to Fire- under system: 3- and issued: Test report on applicationDeclared PerformanceEssential Characteristic Performance Harmonised technical standardLength and Width L3 & W3 BS EN 13163:2012Thickness T2 BS EN 13163:2012Squareness Sb5 BS EN 13163:2012Flatness P30 BS EN 13163:2012Reaction to Fire Euroclass F and E BS EN 13501-1:2007 +A1:2009Durability of RtF against Fire performance of EPS BS EN 13163:2012ageing / degradationdoes not deteriorate with timeThermal Conductivity λD 0.036W/mK BS EN 13163:2012Thermal Resistance See Table 3 – Thermal Resistance BS EN 12667:2001Compressive Strength at CS(10)100 BS EN 13163:201210% deformationCompressive Creep cc(2/1.5/50)0.3σ 10BS EN 13163:2012Water Vapour Transmission 30 - 70µ BS EN 12086:2013Dimensional Stability DS(N)5 BS EN 1603:2013Floors | Walls | Roofs Jablite Claymaster Technical Information 37