GER 1500 USER MANUAL

More documents

Recommendations

Info

GER 1500 SPECTRORADIOMETER 30Section 4 – Battery Charger1. IntroductionThe battery charger charges one (1) or two (2) SMARTPACK batteries simultaneously. The chargeroperates from twelve (12) volts DC. This can be obtained from 115 or 230 volt AC line voltage usingthe AC Adapter Unit provided or from an US manufactured automobile cigarette lighter using theoptional adapter.2. Operation1. The two pronged AC plug of the AC adapter is plugged into a wall socket and the DC output plugof the AC adapter is plugged into the connector in back of the battery charger as shown in the nextfigure.2. Insert batteries into the charging bays. The battery slots are keyed so the batteries can only beinserted in the proper orientation.3. Turn on the power to the battery charger using the power switch. The green LOCK indicator’sLED illuminates, indicting that a battery is properly inserted in each bay. Battery charging nowbegins. This is indicated by the red STATUS LED is being illuminated.4. There are three different charge cycles listed below:Fast Charge CycleThe batteries are first charged using a fast charge cycle. This operation takes approximately two (2)hours on a discharged battery. After the fast charge cycle the batteries are usable, but they have notreached full capacity.Top-off Charge CycleThe charger then enters the top-off charge cycle. This lasts for about five (5) hours and ensures thatthe batteries are charged to full capacity. At this time, the STATUS LED's are no longer illuminated.GER 1500 USER MANUAL, REVISION 3.7
GER 1500 SPECTRORADIOMETER 31Pulse-trickle Charge CycleLastly, if the batteries are fully charged, the battery charger enters the pulse-trickle charge cycle. Thiscycle compensates for the self-discharge characteristics of NiMH batteries by periodically supplying acharge pulse. This allows the batteries to remain at full capacity.5. Remove batteries from battery charger for GER 1500 operations.GER 1500 USER MANUAL, REVISION 3.7
Page 1: GER 1500USER MANUALRevision 3.729 F
Page 5 and 6: GER 1500 SPECTRORADIOMETER 1Section
Page 7 and 8: GER 1500 SPECTRORADIOMETER 33. CONT
Page 9 and 10: GER 1500 SPECTRORADIOMETER 5ROW 2Ro
Page 11 and 12: GER 1500 SPECTRORADIOMETER 7GER 150
Page 13 and 14: GER 1500 SPECTRORADIOMETER 9If the
Page 15 and 16: GER 1500 SPECTRORADIOMETER 11The sc
Page 17 and 18: GER 1500 SPECTRORADIOMETER 13File n
Page 19 and 20: GER 1500 SPECTRORADIOMETER 15SAVE A
Page 21 and 22: GER 1500 SPECTRORADIOMETER 17Autosa
Page 23 and 24: GER 1500 SPECTRORADIOMETER 19Comput
Page 25 and 26: GER 1500 SPECTRORADIOMETER 21OKProc
Page 27 and 28: GER 1500 SPECTRORADIOMETER 23SINGLE
Page 29 and 30: GER 1500 SPECTRORADIOMETER 25When P
Page 31 and 32: GER 1500 SPECTRORADIOMETER 27Sectio
Page 33: GER 1500 SPECTRORADIOMETER 29Downlo
Page 37 and 38: Appendix B_________________________
Page 39 and 40: APPENDICES 35Averaging = 1Si integr
Page 41 and 42: APPENDICES 37CUSTOM FOREOPTIC NAME
Page 43 and 44: APPENDICES 39file “gerpda.txt”.
Page 45 and 46: APPENDICES 41GER 1500 USER MANUAL,
Page 47 and 48: Appendix FGPS Input SpecificationAP
Page 49 and 50: APPENDICES 45Reference ButtonThe Re
Page 51 and 52: APPENDICES 47GER 1500pda Software I
Page 53 and 54: APPENDICES 49GER 1500pda Software A
Page 55 and 56: APPENDICES 51Open File…Delete Fil
Page 57 and 58: APPENDICES 53Auto SavePrompt SaveAb
Page 59 and 60: APPENDICES 55Plot AxisThe “Defaul
Page 61 and 62: APPENDICES 57MENU BUTTON “CTRL”
Page 63 and 64: APPENDICES 59Get Target Initiates a
Page 65 and 66: APPENDICES 61Get GPSReturns the cur
Page 67 and 68: APPENDICES 633. Press the “Next b
Page 69 and 70: APPENDICES 657. Press the “Next >
Page 71 and 72: APPENDICES 67Copying Your Instrumen
Page 73 and 74: APPENDICES 69PDA Software / Bluetoo
Page 75 and 76: APPENDICES 717. Tap the “New Part
Page 77 and 78: APPENDICES 7311. Tap the “COM Por
Page 79 and 80: APPENDICES 7515. Tap the “OK” b
Page 81 and 82: Appendix KGER 1500 Optional COM2 Bl
Page 83 and 84: PDA Power UpIf the PDA is turned of

GER 1500 USER MANUAL

Create successful ePaper yourself

Delete template?

Save as template?