LC/TU-32/37GD1E Operation-Manual GB - HCinema
LC/TU-32/37GD1E Operation-Manual GB - HCinema
LC/TU-32/37GD1E Operation-Manual GB - HCinema
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Preparation<br />
Setting the System<br />
After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the<br />
cable clamps for bundling the cables.<br />
1<br />
2<br />
3<br />
CAUTION<br />
Removing the terminal cover<br />
Display (rear view)<br />
Connecting the system cable and the AC cord to the Display<br />
AC cord<br />
AVC System (rear view)<br />
Press down the two<br />
upper hooks to remove<br />
the cover toward you.<br />
System cable<br />
Connecting the system cable and the AC cord to the AVC System<br />
(BLACK)<br />
(BLACK)<br />
Press the two hooks<br />
toward the centre of the<br />
Display and remove the<br />
cover toward you.<br />
System cable<br />
AC cord<br />
(WHITE)<br />
(GREY)<br />
(WHITE)<br />
Connect the plug into<br />
the terminal and secure<br />
it by tightening the<br />
thumb screws.<br />
(GREY)<br />
Connect the plug firmly<br />
until the hooks on both<br />
sides click.<br />
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE<br />
AC CORD CONNECTED.<br />
7