Yeoman CL - The Stove Yard

MAINTENANCE and SERVICING1.5 During this time the appliance may give off someunpleasant odours. Keep the room well ventilated to avoida build-up of fumes.Fixing Screws x 81.6 Your Yeoman retailer can carry out service andmaintenance.2. REMOVAL OF THE LOG GUARD2.1 To remove the Log guard:Glass ropesealB—Lift Log Guard clear of the supporting brackets.—Rotate to clear the sides of the door opening.Do not use appliance without the log guard in position.3. FITTING AND REMOVAL OF FIREBRICKS3.1 See Installation Instructions, Section 3.4. FITTING AND REMOVAL OF BAFFLE4.1 See Installation Instructions, Section 4.4.2 It is important to remove and clean the Baffle system toensure the flue ways are clear of soot and debris and toensure the safe and efficient operation of the stove. Thefrequency of cleaning depends on the stove operatingconditions.4.3 The baffle system is designed to give safe and efficientoperation of the stove. Replace any damaged baffleimmediately.Glass ropesealASealYeomanCL3Length (mm)YeomanCL5DoorPR8738YeomanCL8Glass rope seal A 930 1025 1220Glass rope seal B 255 340 460Black face4.4 Do not modify the baffle system.5. FITTING A NEW DOOR GLASS5.1 To maintain safe use of the appliance damaged door glassmust be replaced immediately. To do this:Glass ropesealB—Open door and lift free of hinge blocks.PR8739—Lay door face down on a soft flat surface to protect thepaintwork and glass.—Remove the glass clamp and screws x 8. The oldglass can then be lifted clear of the door. Note how thesealing rope is placed around the glass.Dispose of the old glass safely.Glass rope sealAPR875726