Yeoman CL - The Stove Yard

More documents

Recommendations

Info

USER INSTRUCTIONS1. General POINTS1.1 Before use of this appliance please read theseinstructions fully.The appliance must be fitted by a registered installer*, orapproved by your local building control officer.Data Plate1.2 All local regulations, including those referring to nationaland European Standards need to be complied with wheninstalling the appliance.1.3 Only use for domestic heating in accordance with theseoperating instructions.1.4 You must burn only approved fuels. Do not use with liquidfuels or as an incinerator.1.5 Appliance surfaces become very hot when in use. Usea suitable fireguard if young children, elderly or infirmpersons are present.Stovax offer firescreens, sparkguards and hearthgate systemsfor protection‡. Your Yeoman retailer can advise you aboutthese products.1.6 Do not place photographs, TV’s, paintings, porcelain orother combustible items on the wall or near the appliance.Exposure to hot temperatures will cause damage.1.7 Extractor fans or cooker hoods must not be placed in thesame room or space as this can cause appliance to emitfumes into the room.1.8 Do not obstruct inside or outside ventilation required forthe safe use of this appliance.1.9 Do not make unauthorised changes to the appliance.PR8745The data plate is found on a swing out data plate locatedon the back of the stove on the left hand side (seeDiagram 1).Triple Air SystemsAIR CONTROLSThis Yeoman appliance has a triple air system, providingcleaner burning and greater efficiency and control (seeDiagram 2).1) Airwash - air drawn over the window cleans the glass.The source of Primary Combustion air when burning wood.2) Primary Air - for use with solid fuel and when lightingwood fires.3) Cleanburn - secondary air is preheated through a heatexchanger to combust unburned hydrocarbons, providing acleaner and more efficient burn.1.10 The chimney must be swept at least once a year (see UserInstructions, Section 13).1.11 Do not connect, or share, the same flue or chimneysystem with another appliance.1.12 This appliance is designed to be used with the doors shut.SERIAL NUMBER1.13 This number is required when ordering spare parts ormaking warranty claims. It is found on the appliance dataplate.‡In the U.K. these products must conform to the latestedition of BS 8423, Fireguards for use with solid fuelappliances.If appliance is operating unattended they must conform tothe latest edition of BS 3248.*Registered on the Competent Persons Scheme (GB only)see page 26 / INFO (Republic of Ireland).PR8702For Air Controls see the diagram over.Use the tool provided to operate the air controls.Do not place tool on hot surfaces (e.g. top of stove).4
USER INSTRUCTIONSCLOSEAirwash ControlOPEN—All open flued appliances can be affected by temporaryatmospheric conditions which may allow fumes toenter the house. Because of this an electronic carbonmonoxide detector conforming to the latest editionof BSEN50291 must be fitted in the same room asthe appliance. The existence of an alarm must not beconsidered a substitute for ensuring regular servicingand maintenance of the appliance and chimney system.If the alarm sounds follow the instructions given underWarning above.PR8721Primary ControlCLOSEOPENDOOR OPERATION1.14 Use a protected gloved hand to operate.DO NOT OPEN THE DOOR WITH BARE HANDSTo Open and CloseRotate handle and pull door to openPR87222. USING THE Appliance FOR THE FIRSTTIME2.1 To allow the appliance to settle, and fixing glues and paintto fully cure, operate the appliance at a low temperature forthe first few days.2.2 Do not touch the paint during the first period of use.2.3 During this time the appliance may give off someunpleasant odours. Keep the room well ventilated to avoida build-up of fumes.2.4 Please be aware that, during use, rope seals may discolour.This is normal.3. RECOMMENDED FUELS3.1 Wood LogsPR8723WARNINGPR8724Burn only seasoned timber with a moisture content of lessthan 20%. To ensure this allow cut wood to dry for 12 to18 months.Wood LengthProperly installed, operated and maintained thisappliance will not emit fumes into the room.Occasional fumes from de-ashing and refuelling may occur.Persistent fume emission is potentially dangerous andmust not be tolerated.If fume emission does persist:—Open doors and windows to ventilate the room.ApplianceCL3CL5CL8Wood Length200mm330mm400mm—Allow fire to burn out and safely dispose of fuel from theappliance.—Check for chimney blockage and clean if required.—Do not attempt to relight until the cause of the emissionhas been identified and corrected.Poor quality timber:—Causes low combustion efficiency.—Produces harmful condensation.—Reduces effectiveness of the airwash and life of theappliance.If necessary seek expert advice.5
Page 1 and 2: Yeoman CLFree Standing StoveModels:
Page 3: APPLIANCE COMMISSIONING CHECKLISTTo
Page 10: USER INSTRUCTIONSCheck for obvious
Page 17: PRE-INSTALLATION CHECKS1. FlueModel
Page 20 and 21: INSTALLATION INSTRUCTIONS—Secure
Page 22 and 23: INSTALLATION INSTRUCTIONS6. HEARTH
Page 24 and 25: COMMISSIONING1.1 To commission:COMM
Page 26 and 27: MAINTENANCE and SERVICING1.5 During
Page 28 and 29: MAINTENANCE and SERVICING7. ADJUSTI
Page 30 and 31: SPARES LISTYM-CL5WRef.No.ProductCod
Page 32: SERVICE RECORDS1ST SERVICEDate of S

Yeoman CL - The Stove Yard

Create successful ePaper yourself

Delete template?

Save as template?