86A180EF04-Escala PL3200R - Support On Line - Bull

Safety NoticesAttention: When moving or relocating certain configurations of the system, the Bulk PowerRegulators (BPRs) must be removed from the top of the rack (front and rear) to ensureproduct stability. Specifically, removal of the top two BPRs in the front and rear is required insystems that have fewer than 2 I/O drawers in the rack.A danger notice indicates the presence of a hazard that has the potential of causing deathor serious personal injury. Danger notices appear on the following pages:• on page vi• on page 1-9A caution notice indicates the presence of a hazard that has the potential of causingmoderate or minor personal injury. Caution notices appear on the following pages:• on page vii• on page 1-9• on page 1-11• on page 4-12• on page 4-20For a translation of the safety notices contained in this book, see the System Unit SafetyInformation, order number 86 X1 11WD.Electrical SafetyObserve the following safety instructions any time you are connecting or disconnectingdevices attached to the system.DANGER!An electrical outlet that is not correctly wired could place hazardous voltage on metalparts of the system or the devices that attach to the system. It is the responsibility ofthe customer to ensure that the outlet is correctly wired and grounded to prevent anelectrical shock.Use one hand, when possible, to connect or disconnect signal cables to prevent apossible shock from touching two surfaces with different electrical potentials.During an electrical storm, do not connect cables for display stations, printers,telephones, or station protectors for communications lines.Caution:This product is equipped with a four–wire (three–phase and ground) power cable forthe user’s safety. Use this power cable with a properly grounded electrical outlet toavoid electrical shock.DANGER!To prevent electrical shock hazard, disconnect all power cables from the electricaloutlet before relocating the system.viESCALA PL3200R Installation Guide