User Instructions SITOP DC UPS Software “Application”

More documents

Recommendations

Info

Completion of installation. Page 10 of 30
2.2. Installation USB Drivers The installation of drivers is only required for versions with USB interface. Before starting the installation please make sure that the SITOP DC UPS software (freeware download under www.siemens.de/sitop) is installed completely. Then connect the SITOP DC UPS module with a free USB interface. The SITOP DC UPS module is now identified automatically, the hardware wizard opens: Page 11 of 30
Page 1 and 2: User Instructions SITOP DC UPS Soft
Page 3 and 4: 1. Download SITOP DC UPS Software S
Page 5 and 6: Accept the license agreement. Page
Page 7 and 8: Choose the destination folder in wh
Page 9: Typical settings of the SITOP softw
Page 13 and 14: Please acknowledge the following wa
Page 15 and 16: 2.3. Update USB Drivers For the cor
Page 17 and 18: 3. Program Operation 3.1. Program S
Page 19 and 20: • Option for starting an applicat
Page 21 and 22: • Option for starting an applicat
Page 23 and 24: 3.3. SITOP DC UPS Monitoring Displa
Page 25 and 26: 3.5. Logfile In the logfile all eve
Page 27 and 28: 4. OPC Server The SITOP DC UPS soft
Page 29 and 30: Table 2: Coding status word The sta

User Instructions SITOP DC UPS Software “Application”

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?