FIMS Media SOA Framework - AMWA

FIMS Media SOA Framework Phase1 (Preliminary)Specific error codes for the transfer media service are enumerated in TransferErrorCodeType, such as:- DATA0220: Invalid URI protocol specified for transport operations.- DATA0221: Invalid Output Directory or Target URI path8.2.1.1.4 Transfer NotificationIf the notifyAt element is set in the job transfer request, then the service shall respond with a notification to thespecified endpoint when the job completes. The transfer notification message uses the MediaResponseTypedescribed in the base schema.8.2.1.1.5 TransferFaultNotificationTypeThis type provides fault information for the transfer service fault notification. It extends the base response type,since the base response type provides information on the invoked job and operation, which allow correlating thenotification with the original asynchronous request. Fault information is provided with the TransferFaultType. Ifthe notifyAt element is set in the job transfer request, and a failure occurs during the job execution, then theservice shall respond with a transfer fault notification to the specified endpoint.8.2.1.2 File Transform InterfaceA transform media service operates on media content to transform the content or a list of content elementsfrom a source media format to a target or a list of target media formats.8.2.1.2.1 TranscodeRequestTypeThis type represents a request to the transform media service for transcoding content from a source format to atarget format. This type inherits all the elements from the MediaRequestType. The parameters section detailsthe additional elements for this type. However, it is important to notice that the bmContent element from theparent MediaRequestType provides the location information for the source file or files to be transcoded.8.2.1.2.1.1 ParametersPrivate committee documentWorking Draft for review by FIMS Rev v1, Nov-16-2010 Page 43 of 89