FIMS Media SOA Framework - AMWA

FIMS Media SOA Framework Phase1 (Preliminary)9.1.3 Transform Service [to be moved/merged with Section 8]INOUTpriorityjobGUIDrequestedCompletionTimebmoTechnical MetadatatransformProfile[1..*]outputFileName[0..1]descriptiveMetadata[0..1]Descriptive MetadataserviceMetadata[0..1]Technical MetadatanotifyAtTransformoperationInfo (Ack)serviceProviderInfo (Ack)operationInfo (Notification)serviceProviderInfo (Notification)bmo (Notification)Technical MetadataautoQCStatus[0..1] (Notification)Figure 11 Interface Parameters of Transform ServiceTransform Service – Input ParametersParameterPriorityjobGUIDrequestedCompletionTimebmotransformProfile [1..*]outputFileName [0..1]descriptiveMetadata [0..1]serviceMetadata [0..1]notifyAtDescription‘Immediate’, ‘Urgent’, ‘High’, ‘Middle’, and ‘Low’.Global Job IDOptional - Time to be finishedContains reference to source file and locationContains reference to the profile used for the transform.Optional - if provided it should be used to name the new file, otherwise nameshould be generated form source file name.Optional - contains user-defined metadata (description, comment etc.) forwrapperOptional - Used to provide a extension mechanism for service providerimplementations, e.g. File Division on Time code Break / Capture Speed /Acquisition of MetadataOptional - contains replyTo and faultTo endpoint addresses. If provided, theservice must respond to the supplied URIs when job completion or failed statusoccur.Table 4 Input Parameters of Transform ServicePrivate committee documentWorking Draft for review by FIMS Rev v1, Nov-16-2010 Page 79 of 89