Energy Top Range - Brochure - Ferroli

ENERGY TOP B/BK> > > Heating division> SPECIFICATIONSFLUE GAS EVACUATIONVarious solutions are available for the air intake and flue gas outlet on the ENERGY TOP B/BK vertical modules, for installation as an individualboiler or as a cascade system. The low flue gas temperature means special polypropylene accessories can be used.As regards flue gas evacuation system independent for each generator, it can occur through 80 mm appropriate optional accessories, withcomburent air intake from the boiler room (type B23).> EVACUATION THROUGH INDIVIDUAL TERMINAL PIPE ø 80 mmEach heating unit, even when connected in cascade, can be connected directly at the 80 mm diameter flue gas outlet, using a special terminalkit complete with pipe, wind-protection grill and gasket. One kit must be used for each flue gas outlet (each furnace).code 041013X0> TECHNICAL DATAENERGY TOP B/BK 80 B/BK 125 B 160 B 250For individual flue gas outletMaximum stack pressure head at Pmax pascal 200 250 200 250Maximum flues length meq 20 10 20 10Sample with individual pipeevacuation systemcode 041013X0Terminal pipe with gasket-individual pipe system ∅∅ 80 mm> COLLECTIVE FLUES MANIFOLDDifferent types of flues manifolds are available, depending on cascading layout chosen, i.e. “side-by-side” or “back-to-back” installation.The diameters of the manifolds depend on the total output of the series of modules.Flues evacuation sample with back-to-back installationback to backFlues evacuation sample with side-by-side installationside by side17