Energy Top Range - Brochure - Ferroli

ENERGY TOP> > > Heating division> THE MINDCONTROL UNIT2 32 3164 7KEY1 Display2 Central heating temperature setting3 Domestic hot water temperature setting(with optional storage cylinder)4 Summer/Winter mode5 On/Off6 Reset parameters7 Economy/Comfort mode5Remote timer control connectedInformationReset generatorFaultGenerator offTemperature compensation modeCentral heating modePump ONBurner ONEconomy modeDomestic hot water operationRead parametersDomestic hot water modeThe evolved electronics on ENERGY TOP can perfectly manage applications where multiple heat generators are used in cascading, minimisingthe configuration and commissioning operations.The MASTER/SLAVE function allows operation of a series of cascaded boilers, without requiring an additional control unit. With just a simpleconnection (two wires) between the control boards of the boilers in the cascade, the entire system acts as a single virtual boiler. The safetycircuit reduces boiler lockout and system shutdown, automatically attempting to ignite the module three times in the event of temporaryshutdown (natural gas versions). If the shutdown occurs repeatedly, the system goes into permanent lockout mode, for safety reasons.Control board features a series of input and output signals, both analogue and digital (on/off), in order to control or adjust the operation ofthe single boiler or the entire cascade system also via a remote connection. Below are some examples:FAULT SIGNALActive in case of boiler’s fault messageBURNER ON SIGNALActive when at least one heating unit is onRESET SIGNALUsed to reset “temporary” faultsCombined management of the signals allowsthe operating status of the heat generatorto be checked and set via a remote connection°C/%P10 Volt0-10 VOLT INPUT SIGNALAllows the boiler (or cascade of boilers)to be controlled via a remote connection,in system outlet temperature or outputpercentage mode.ELECTRONIC INSTALLATIONSUPERVISOR4