Rexnord-Stephan S4 Catalogue

04-2007 3P0200-XX7. Technical Appendix7.2.1 Coating systemsThe standard available coatings for the different types of applications from Rexnord-Stephan are summarized inthe following tables. Before the dip primer coating, all castings undergo grit blasting for surface preparation(SA 2 ½). If no special coating is defined, the delivery features system 1 in RAL 5002. For high-quality coatings(4...6), the final color tone can be defined by the customer. If no color tine is specified, the final coating is done inRAL 5002 (blue).Deviating versions are possible in addition to the listed coatings (e.g. through customer regulations). However,they must be checked by Rexnord-Stephan for feasibility in each case before placing an order. It is possible that itmay result in significant deviations with respect to extra prices and delivery time. Please contact us.Table 1:System no.: 0 1 2 3Paint coat1 Dip primer 20 µm Dip primer 20 µm Dip primer 20 µm Dip primer 20 µmcoating coating coating coatingColor: Red- Color: Red- Color: Red- Color: Redbrownbrown brown brown2 1C top coat 40 µm 1C top coat 40 µm 1C top coat 40 µmColor: Color: Color:RAL 5002 RAL 7035 RAL 7035Acrylic / PVC Acrylic / PVC Acrylic / PVC3 1C top coat 40 µmColor:RAL 5002Acrylic / PVC456Total coating thickness 20 µm 60 µm 60 µm 100 µmAdditional paint coats 1Drying time less than 1 day 1 day 1 dayCorrosion protection ++ +++ ++ ++++Temperature resistanceContinuous load up to 100 °C 100 °C 100 °C 100 °CShort-term load up to 160 °C 160 °C 160 °C 160 °CChemical resistance - + - ++Mechanical resistance - + - ++UV resistance - + - ++Application Only S4 - gear heads Standard coating for Pre-coating for final High-quality coating forfor assembly center S4 indoor installation coating at customer S4 indoor installationExtra price No No No YesT6