Rexnord-Stephan S4 Catalogue

04-2007 3P0200-XX7. Technical Appendix7.3.11 Standard versionOur motors and geared motors correspond to the relevant standards. The most important ones are:IEC (CEI) DIN VDERated output IEC 34 - 1, IEC 85 DIN EN 60034 - 1 VDE 0530 - 1Dimensions IEC 72 DIN 42673 / 42677Mounting position IEC 34 - 7 DIN EN 60034 - 7 VDE 0530 - 7Cylindrical shaft ends IEC 72 DIN 748 - 3Terminal designations IEC 34 - 8 DIN VDE 0530 - 8 VDE 0530 - 8Enclosure types (IP code) IEC 34 - 5 DIN VDE 0530 - 5 VDE 0530 - 5Cooling types (IC code) IEC 34 - 6 DIN EN 60034 - 6 VDE 0530 - 6Noise limits IEC 34 - 9 DIN EN 60034 - 9 VDE 0530 - 9Supply voltage IEC 38 DIN IEC 387.3.12 Explosion-protected motorsIEC (CEI)DINGeneral IEC 79 - 0 DIN EN 50014Increased safety (EEx e) IEC 79 - 7 DIN EN 50019Flame-proof enclosure (EEx d) IEC 34 - 1 DIN EN 50018Non sparking (EEx n) DIN EN 50021Electrical equipment for use in areas with combustible dust DIN EN 5028177.3.13 Thermal standardsThree-phase AC squirrel-cage motors from Rexnord-Stephan correspond to the thermal regulations of the relevantnational and international standards for permissible overtemperature.Standard Permissible Permissible overtemperature in Kambient temperature (measured using the resistance method)Insulation class°C B FDIN, VDE, IEC 40 80 105British Standards (BS) 40 80 105Canadian Standards (CSA) 40 80 105USA (NEMA) 40 80 105American Bureau ofshipping (ABS) 50 75 95Bureau Veritas (BV) 50 70 90Det Norske Veritas 45 70 90Germanischer Lloyd (GL) 45 75 95Lloyds Register (LR) 45 70 90T27