Rexnord-Stephan S4 Catalogue

04-2007 3P0200-XX7. Technical AppendixP R is the permissible braking energy in Joule per second. The permissible braking energy per braking W Rmax isdependent upon the operating frequency. The listed values apply to a motor speed of 1500 min -1 .The dynamic braking torque TB applies to dry run, run in brake and normal operating conditions. The braking torquedecreases with increasing motor speed.If the friction areas contain oil or grease, the braking torque is reduced down to 50%. If the brake is not run in, thebraking torque may be 20% less than the rated torque.7.3.17 Brake kitStandard motors of size 63 to 180 can be converted to brake motors. Brake kits are available for this purpose. Thebrake hub is installed on the motor shaft to ensure an operationally reliable design. Only the plastic fan blade isdriven by a screw-in shaft.Position of the manual release leverMotor Brake T B "° X d VSize Size Nm mm mm mm63 08 4 0 85 25 7571 08 4 0 85 25 7580 10 10 0 98 25 9190 13 20 0 117 25 93100 15 40 30 128 32 97112 15 40 30 128 32 115132 20 80 30 166 40 122160 23 150 30 210 40 161180 26 240 30 230 40 183200 / 225 458-25 400 0 500 24250 / 280 Upon requestT30