MC95FR464_DS_REV2.0_20120104.pdf - ABOV Semiconductor
MC95FR464_DS_REV2.0_20120104.pdf - ABOV Semiconductor
MC95FR464_DS_REV2.0_20120104.pdf - ABOV Semiconductor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MC95FR332/432/364/4645. PIN DESCRIPTIONPINNameI/O Function @RESET Shared withP00 I/O - 8-bit I/O port, P0.P01P02P03P04P05P06P07- Can be set in input or output mode bitwise.- Internal pull-up resistor can be activated bysetting PxnPU bit in PxPU register when thisport is used as input port.- Can be configured as an open drain outputmode by setting PxnOD bit in PxOD register.P10 I/O 8-bit I/O port, P1.P11P12P13P14P15P16- Can be set in input or output mode bitwise.- Internal pull-up resistor can be activated bysetting PxnPU bit in PxPU register when thisport is used as input port.- Can be configured as an open drain outputmode by setting PxnOD bit in PxOD register.InputInputKS0/T0KS1/T1/PWM1KS2/T2KS3/T3/PWM3KS4/EC0KS5KS6KS7KS8KS9KS10KS11KS12KS13KS14/MOSIP17P20 I/O - 3-bit I/O port, P2.InputKS15/MISORESETB NOTEP21P22- -- Can be set in input or output mode bitwise.- Internal pull-up resistor can be activated bysetting PxnPU bit in PxPU register when thisport is used as input port.- Can be configured as an open drain outputmode by setting PxnOD bit in PxOD register.INT2/<strong>DS</strong>CLINT3/<strong>DS</strong>DA-NOTE When P20 is used as a external reset pin(=RESETB) by the FUSE configuration, this pin is configured as aninput port with internal pull-up resistor on.18 January, 2012 Rev.2.0
Change language