Quick mould change - KubouÅ¡ek Group

More documents

Recommendations

Info

10 Mould change options Vertical load mould change solution with fixed clamps Vertical load mould change solution with, movable clamps. Clamps are moved manually or with hydraulic cylinders. Vertical load and rotate fixed clamp solution
vERTICAl loAD MoulD ChAngE Clamping on the fixed side Manual movable clamps Drop and rotate solution with safety latches (the mould on this machine is just for testing) vertical load mould Slide plates and mould change is the most guides on common method of a cylinder loading moulds into the machine. For this method the hydraulic clamps are positioned vertically between the tie bars on both platens. On the fixed platen 4 clamps would be mounted with guides, slide plates, tie bar protectors and mould stop locator. The mould slides in behind the mould guides and is positioned by the mould stop locator. The clamps can then be activated and the mould is clamped on the fixed platen. The movable platen is then closed and the movable platen clamps are then activated. The mould is now securely clamped. Centering rings are not required when using standardized back plates. � Movable clamps Movable clamps can be used when fully standardized back plates are not feasible. MOD/WOD/NOD series clamps can be made movable in T-slots. This movement can be accomplished manually or automatically using a pneumatic or hydraulic cylinder. When done automatically the clamp sensor will determine if the clamp has reached the back plate. The cylinders are mounted on long T-nuts for accurate movement in the T-slots. It will still be necessary to standardize the back plate thickness at the clamping points as well as the height from the base to centerline if a mould stop locator is used. � vertical load & Rotate Large moulds are often wider than the tie bar gap but must be rotated between the tie bars when loaded vertically. For this requirement the MOD/WOD/NOD clamps are positioned horizontally between the tie bars. Support ledges with a centering device position and center the mould accurately. 11 1. verticla loading
Page 1 and 2: UK Quick mould change Do you change
Page 3 and 4: EAS oFFERS You ThE MoST CoMplETE RA
Page 5 and 6: 1 Clamping systems and ejector syst
Page 7 and 8: A SIMplE ADApTIvE MAnuAl ClAMpIng S
Page 9: ThE IDEAl SoluTIon FoR AuToMATED QM
Page 13 and 14: hoRIzonTAl MoulD ChAngE uTIlIzIng A
Page 15 and 16: MounTIng In ThE MAChInE plATEn, lEA
Page 17 and 18: EAS pRESSMAg. A ToTAl RAngE FoR EvE
Page 19 and 20: TIME SAvIng AuToMATIC EjECToR Coupl
Page 21 and 22: FoR RETRoFITTIng ExISTIng MAChInES
Page 23 and 24: In A QuICK AnD SIMplE WAY 1.9 As we
Page 25 and 26: Manual and automatic multi couplers
Page 27 and 28: This is an example of how fluid con
Page 29 and 30: SIMplE, lEAK pRooF AnD FAST ConnECT
Page 31 and 32: Mould change tables and cars 1
Page 33 and 34: A SIMplE hoRIzonTAl WAY oF ChAngIng
Page 35 and 36: FlExIbIlITY, SpEED AnD EASY To hAnD
Page 37 and 38: FoR SMAll AnD lARgE MoulDS up To 00
Page 39 and 40: MoulD ChAngES WIThIn MInuTES InSTEA
Page 41 and 42: MoulD ChAngE TAblES InCREASE YouR F
Page 43 and 44: FoR YouR CoMplETE AuToMATED pRoDuCT
Page 45 and 46: QuICK, SAFE AnD SIMplE FoR MoulDS u
Page 47 and 48: EASY MovEMEnTS oF hEAvY loADS .8 A
Page 49 and 50: EASY MovEMEnTS oF hEAvY loADS .9 Fo
Page 51 and 52: SAvE houRS on YouR ExpEnSIvE pRoDuC
Page 53 and 54: 4 Service units and storage systems
Page 55 and 56: SIMplE AnD SAFE MAInTEnAnCE oF YouR
Page 57 and 58: CoMbInATIon oF A MoulD ChAngE CAR A
Page 59 and 60: ToolS nEED To bE SToRED AnD In MAnY

Quick mould change - KubouÅ¡ek Group

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?