Quick mould change - KubouÅ¡ek Group

More documents

Recommendations

Info

46 Air floating mould change cars "System Aerogo” Air floating cars actually float on air film like a hovercraft and are therefor very flexible in moving around pillars or in restricted areas and can carry very heavy loads.
EASY MovEMEnTS oF hEAvY loADS .8 A 110 t mould is transported from its storage system to the injection moulding machine or inspection unit. This customer, a producer of large plastic container, had no overhead crane available for such heavy weights and this solution enables them to change these moulds within 35 minutes. The push pull mechanism is a simple spindle device, which pushes or pulls the moulds in or out the large twin machine. Space is very limited around the machines at this automotive supplier, two air floating cars for 2 x 20 and 2 x 15 t moulds are used to change these moulds in less then 15 minutes. The push /pull changing device can change the moulds to both sides of the car, which brings even more flexibility and speed. For extreme heavy moulds as at this container manufacturer EAS installed this air floating system in combination with storage systems, a 3400 t and a 6000 t injection moulding machine as well as an EAS inspection unit. The car can handle up to 150 t moulds and the change over time is less then 30 minutes. Air floating cars actually float on a thin film of air like a hovercraft whih provides great mobility in restricted areas. They can also carry very heavy loads without special floor reinforcement. An air floating car can be in interesting alternative to rail guided mould change cars. They easily move very have loads (up to 200 tons or more) in tight spaces while providing greater flexibility in plant layout then a rail system. The floor must have the cracks filled, be sealed, and level for the best performance. A suitable air compressor is required with an appropriately sized air hose. For greater range without several connections points, an air compressor can be placed on board the car. Noise level is surprisingly low. The upper roller deck is the same as a rail guided cart and features the same style of transfer devices, guides and mould locks. They can be loaded from a mould storage rack or by overhead crane. Air floating cars can be easily positioned in front of the machines with docking rails and locked to the machine. They can be controlled by a pendant control panel or by radio control. Air powered drive wheels control the speed and direction of the cart while the cart is moving. Air floating solutions can be very attractive for smaller mould handling requirements. It can also be combined with an electric drive system to travel longer distance. The operator can walk behind or even sit on board. Contact EAS for very creative solutions to your mould handling problems. 47
Page 1 and 2: UK Quick mould change Do you change
Page 3 and 4: EAS oFFERS You ThE MoST CoMplETE RA
Page 5 and 6: 1 Clamping systems and ejector syst
Page 7 and 8: A SIMplE ADApTIvE MAnuAl ClAMpIng S
Page 9 and 10: ThE IDEAl SoluTIon FoR AuToMATED QM
Page 11 and 12: vERTICAl loAD MoulD ChAngE Clamping
Page 13 and 14: hoRIzonTAl MoulD ChAngE uTIlIzIng A
Page 15 and 16: MounTIng In ThE MAChInE plATEn, lEA
Page 17 and 18: EAS pRESSMAg. A ToTAl RAngE FoR EvE
Page 19 and 20: TIME SAvIng AuToMATIC EjECToR Coupl
Page 21 and 22: FoR RETRoFITTIng ExISTIng MAChInES
Page 23 and 24: In A QuICK AnD SIMplE WAY 1.9 As we
Page 25 and 26: Manual and automatic multi couplers
Page 27 and 28: This is an example of how fluid con
Page 29 and 30: SIMplE, lEAK pRooF AnD FAST ConnECT
Page 31 and 32: Mould change tables and cars 1
Page 33 and 34: A SIMplE hoRIzonTAl WAY oF ChAngIng
Page 35 and 36: FlExIbIlITY, SpEED AnD EASY To hAnD
Page 37 and 38: FoR SMAll AnD lARgE MoulDS up To 00
Page 39 and 40: MoulD ChAngES WIThIn MInuTES InSTEA
Page 41 and 42: MoulD ChAngE TAblES InCREASE YouR F
Page 43 and 44: FoR YouR CoMplETE AuToMATED pRoDuCT
Page 45: QuICK, SAFE AnD SIMplE FoR MoulDS u
Page 49 and 50: EASY MovEMEnTS oF hEAvY loADS .9 Fo
Page 51 and 52: SAvE houRS on YouR ExpEnSIvE pRoDuC
Page 53 and 54: 4 Service units and storage systems
Page 55 and 56: SIMplE AnD SAFE MAInTEnAnCE oF YouR
Page 57 and 58: CoMbInATIon oF A MoulD ChAngE CAR A
Page 59 and 60: ToolS nEED To bE SToRED AnD In MAnY

Quick mould change - KubouÅ¡ek Group

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?