Quick mould change - Kuboušek Group

A SIMplE hoRIzonTAl WAY
oF ChAngIng MoulDS
Our manual
mould change
car for one
mould of max.
800 kg.
Our manual
mould change
car with
2 x 500 kg
moulds.
Transferring the mould into the machine can be
done manually or must be powered in depending
on the weight of the mould. When the mould is
light enough, manual transfer is practical.
EAS offers the following solutions:
A manual car is used to transport the moulds from the storage
area directly into the machines. The adjustable height feature
uses a hydraulic hand pump and cylinders to raise and lower
the bed. The car can accommodate one 0,8 t or two 0,5 t
moulds. When the car arrives at the machine it is positioned
to allow the existing mould to be manually pulled out of the
machine. To support the mould between the cart and machine
a set of bridge rollers are manually lowered. Once the mould
has been removed the car is then positioned to allow the new
mould to be manually pushed into the machine. The bridge
rollers are then raised up out the way and mould is transported
back to the storage area.
EAS can offer different solutions depending on mould size
and space limitations. Cars can be configured for side load or
end load operation depending on the plant layout.
Both configurations speed the mould change process.
The moulds are
pushed and
pulled manually.
.1