Quick mould change - KubouÅ¡ek Group

More documents

Recommendations

Info

14 Integrated hydraulic Système mould clamping de bridage systems hydraulique EAS intégré Engel Clamping bolt mounted on the mould Horizontal loading solution with integrated clamping system Machine side
MounTIng In ThE MAChInE plATEn, lEAvES ThE plATEn CoMplETElY FREE 1.5 The integrated system keep the platens free Hydraulic integrated clamping systems with 2 proximity switches for clamp position feedback. The hydraulic cylinder with the wedge and the clamping bolt The integrated hydraulic clamping system (Engel System) is mounted to the sides of the platen, leaving the platen face completely free of obstructions. Depending on machine size the mould is clamped using , 4 or 8 clamps per platen. Each mould would have the corresponding number of EEB clamping bolts mounted to each side of the mould. Clamping is achieved when the hydraulic cylinder moves the wedge on the end of the plunger into the matching wedge shaped slot in the clamping bolt. On small injection moulding machines only 2 hydraulic cylinders per platen are required for clamping. On larger machines (up to 2500 t), 4 hydraulic clamping cylinders per platen are required to handle the forces defined by Euromap 11 and VDMA specifications. On very large machine 8 hydraulic cylinders are required to insure trouble free clamping. Location of the clamping cylinders and clamping bolts must be standardized, and utilizes the centering ring for final mould location. The integrated hydraulic system can be applied to any new machine where the platens can be easily modified to accept the system. These platen modifications do not make it applicable for retrofit to existing machines. No standardization of the mould or back plates is required except for mounting of the clamping bolts. The full platen area can be used for larger moulds. For horizontal load mould change the mould is moved in over rollers and uses a mould stop for final position. For horizontal loading the mould must be standardized for the bottom to the centerline for proper alignment. The closing movement of the machine will push the clamping bolts into the platens. This movement can also be used connect the multi-coupler systems. To pull the clamping bolts out of the platens, the opening of the machine can be used or additional push cylinders can be mounted to the machine. eas engel system 15
Page 1 and 2: UK Quick mould change Do you change
Page 3 and 4: EAS oFFERS You ThE MoST CoMplETE RA
Page 5 and 6: 1 Clamping systems and ejector syst
Page 7 and 8: A SIMplE ADApTIvE MAnuAl ClAMpIng S
Page 9 and 10: ThE IDEAl SoluTIon FoR AuToMATED QM
Page 11 and 12: vERTICAl loAD MoulD ChAngE Clamping
Page 13: hoRIzonTAl MoulD ChAngE uTIlIzIng A
Page 17 and 18: EAS pRESSMAg. A ToTAl RAngE FoR EvE
Page 19 and 20: TIME SAvIng AuToMATIC EjECToR Coupl
Page 21 and 22: FoR RETRoFITTIng ExISTIng MAChInES
Page 23 and 24: In A QuICK AnD SIMplE WAY 1.9 As we
Page 25 and 26: Manual and automatic multi couplers
Page 27 and 28: This is an example of how fluid con
Page 29 and 30: SIMplE, lEAK pRooF AnD FAST ConnECT
Page 31 and 32: Mould change tables and cars 1
Page 33 and 34: A SIMplE hoRIzonTAl WAY oF ChAngIng
Page 35 and 36: FlExIbIlITY, SpEED AnD EASY To hAnD
Page 37 and 38: FoR SMAll AnD lARgE MoulDS up To 00
Page 39 and 40: MoulD ChAngES WIThIn MInuTES InSTEA
Page 41 and 42: MoulD ChAngE TAblES InCREASE YouR F
Page 43 and 44: FoR YouR CoMplETE AuToMATED pRoDuCT
Page 45 and 46: QuICK, SAFE AnD SIMplE FoR MoulDS u
Page 47 and 48: EASY MovEMEnTS oF hEAvY loADS .8 A
Page 49 and 50: EASY MovEMEnTS oF hEAvY loADS .9 Fo
Page 51 and 52: SAvE houRS on YouR ExpEnSIvE pRoDuC
Page 53 and 54: 4 Service units and storage systems
Page 55 and 56: SIMplE AnD SAFE MAInTEnAnCE oF YouR
Page 57 and 58: CoMbInATIon oF A MoulD ChAngE CAR A
Page 59 and 60: ToolS nEED To bE SToRED AnD In MAnY

Quick mould change - KubouÅ¡ek Group

Create successful ePaper yourself

Delete template?

Save as template?