Quick mould change - KubouÅ¡ek Group

More documents

Recommendations

Info

8 Mould change tables for two moulds Step 1 Step Step
MoulD ChAngES WIThIn MInuTES InSTEAD oF houRS Automatic mould change table for two moulds of max. 8 t each. This 800 t machine is equipped with hydraulic clamping system with rollers and with automatic multi couplers. A mould change takes place in less then 4 minutes and this system had a return of investment of 6 months. Mould change table for two moulds of max 2 x 15 t, with an overhead push-pull device. This table features a pre-heating station with automatic multi couplers connections and was placed next to 800 t machine and a 1300 t machine. This mould change table , which can handle two 20 t moulds, has been fitted with a pre-heating unit; this allow pre-heating or the moulds outside the machine, so that valuable production time is not lost by heating the moulds while it is in the machine. Integrated multi couplers ensure automatic connection of all liquid and power supplies. Mould changes with a two station mould change table are faster then a single station mould change table because the mould is pre-staged on the table. Additional time can be saved by pre-heating the mould on the table. When changing a mould the mould in the machine is pulled on the empty station on the table. The table is then shuttled to position the new for loading. The new mould is then pushed into the machine. EAS provides powered transfer mechanisms which load from one side of the table or both sides of the table. Powered roller transfer is also available. This system utilizes powered rollers on the table and in the press to provide the fastest method of changing moulds. When mould change tables are used with 2 presses they increase your flexibility to run smaller production batches and reduce inventory. Side load systems increase safety for the operators because the mould is always supported and guided during the change. Mould change tables can be equipped with Programmable Logic Control (PLC) system which allows manual, semi-automatic or fully automatic operation. Automatic operation requires interfacing with the machine controls, and they are most often applied on new machines. Mould change tables are often equipped with a hydraulic power unit to power table movements as well as clamping, ejector couplers and multi couplers. On this 1000 t machine this table for 2 x 10 t moulds enables the operator to change moulds within 6 minutes. Each mould position features a telescopic push pull device for a fast transfer into the machine. At the end of each device is a pneumatic mould gripper to connect the push pull device to the mould automatically. Each mould need to be equipped with an adapter. 9 .4
Page 1 and 2: UK Quick mould change Do you change
Page 3 and 4: EAS oFFERS You ThE MoST CoMplETE RA
Page 5 and 6: 1 Clamping systems and ejector syst
Page 7 and 8: A SIMplE ADApTIvE MAnuAl ClAMpIng S
Page 9 and 10: ThE IDEAl SoluTIon FoR AuToMATED QM
Page 11 and 12: vERTICAl loAD MoulD ChAngE Clamping
Page 13 and 14: hoRIzonTAl MoulD ChAngE uTIlIzIng A
Page 15 and 16: MounTIng In ThE MAChInE plATEn, lEA
Page 17 and 18: EAS pRESSMAg. A ToTAl RAngE FoR EvE
Page 19 and 20: TIME SAvIng AuToMATIC EjECToR Coupl
Page 21 and 22: FoR RETRoFITTIng ExISTIng MAChInES
Page 23 and 24: In A QuICK AnD SIMplE WAY 1.9 As we
Page 25 and 26: Manual and automatic multi couplers
Page 27 and 28: This is an example of how fluid con
Page 29 and 30: SIMplE, lEAK pRooF AnD FAST ConnECT
Page 31 and 32: Mould change tables and cars 1
Page 33 and 34: A SIMplE hoRIzonTAl WAY oF ChAngIng
Page 35 and 36: FlExIbIlITY, SpEED AnD EASY To hAnD
Page 37: FoR SMAll AnD lARgE MoulDS up To 00
Page 41 and 42: MoulD ChAngE TAblES InCREASE YouR F
Page 43 and 44: FoR YouR CoMplETE AuToMATED pRoDuCT
Page 45 and 46: QuICK, SAFE AnD SIMplE FoR MoulDS u
Page 47 and 48: EASY MovEMEnTS oF hEAvY loADS .8 A
Page 49 and 50: EASY MovEMEnTS oF hEAvY loADS .9 Fo
Page 51 and 52: SAvE houRS on YouR ExpEnSIvE pRoDuC
Page 53 and 54: 4 Service units and storage systems
Page 55 and 56: SIMplE AnD SAFE MAInTEnAnCE oF YouR
Page 57 and 58: CoMbInATIon oF A MoulD ChAngE CAR A
Page 59 and 60: ToolS nEED To bE SToRED AnD In MAnY

Quick mould change - KubouÅ¡ek Group

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?