Quick mould change - Kuboušek Group

EAS Quick Mould Change System Reduces Manufacturing Cost
Quick Mould Changes Systems lower manufacturing cost by reducing
change over time. Frequent mould changes allow inventory to be reduced
and provide faster response to customer requirements.
EAS provides the following
QMC solutions:
� Clamping
� Multi-Couplers
� Ejector Couplers
� Mould Handling
� Pre-heating
Resulting in lower manufacturing cost for you…
Step-by-step Automation
QMC Solutions can be applied in
a series of cost effective steps.
First you will need to analyze
the complete mould change
process step by step to identify
where down time losses are
occurring. Moulds that are used
most frequently are your best
candidates and provide the best
return on investment. These
moulds should be dedicated to
a specific machine or group of
machines.
Ask EAS…
With These Solutions
You Can Achieve:
� Increased Machine Productivity
� Reduced Labour Cost
� Inventory Reduction
� Increased Flexibility
� Faster Response
� Improved Safety
This analysis will identify where
you should start applying QMC
solutions.
In most cases, clamping will be
the first step to reducing mould
change time. Quick clamping
systems are not only faster, but
also safer, as tool set up people
no longer need to climb into the
machine or under the mould to
clamp up.
� For the best solution for your application.
� For a Return on Investment calculation.
� For the complete SMED solutions from
one global source.