6 - MV Agusta

MAINTENANCE 66.4.1. Topping up the engine oil levelTo top up the engine oil level, remove the oil fillerplug by using the 10 mm hexagonal bar supplied,assembled on a proper key (see figure). Pour anappropriate amount of engine oil of the recommendedtype. Never exceed the MAX level mark.At the end of the operation, place back the oil fillerplug.WARNINGBefore reassembling the oil filler plug,grease its O-Ring by using AGIP Grease30.At last, perform the tightening of the oilfiller plug at the tightening torque of 35Nm, by using a dynamometric key.Oil filler plugCAUTIONTo avoid clutch sliding and damage tothe engine, never add chemical additivesto the engine oil, nor use an engineoil different from the one specified in thetable at § 6.3. Make sure that no foreignbody gets in the crankcase while toppingup the engine oil.6- 105 -