33734K- Imperial Gas Logs.indd - Hearth & Home Technologies

More documents

Recommendations

Info

E. Operating Instructions for the “M” SeriesFOR YOUR SAFETY READ BEFORE LIGHTINGWARNING: If you do not follow these instructions exactly, a fire or explosionmay result causing property damage, personal injury or loss of life.A. This appliance has an intermittent pilot. Whenlighting the pilot, follow these instructionsexactly.B. BEFORE LIGHTING smell all around theappliance area for gas. Be sure to smell next tothe floor because some gas is heavier than airand will settle to the floor.WHAT TO DO IF YOU SMELL GAS• Do not try to light any appliance.• Do not touch any electric switch; do not useany phone in your building.• Immediately call your gas supplier?from aneighbor's phone. Follow the gas supplier'sinstructions.• If you cannot reach your gas supplier, callthe fire department.C. Do not use this appliance if any part has beenunder water. Immediately call a qualified servicetechnician to inspect the appliance and toreplace any part of the control system and anygas control which has been under water.Due to high surface termperatures, keep children, clothing and furniture away.Keep burner and control compartment clean. See installation and operating instructions accompanying the appliance.FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of thisor any other appliance.Lighting Instructions, “M” SeriesLIGHTING INSTRUCTIONS1. STOP! Read the safety instruction label.2. Turn wall switch to the "OFF" position.5. To light pilot and main burner, turn wall switch to "ON".Do not light by hand.6. If appliance will not operate, follow the instructions "TOTURN OFF GAS TO APPLIANCE" and call your servicetechnician or gas supplier.GASCONTROLKNOB3. Wait five minutes to clear out any gas. If you smellgas, STOP! Follow "B" on the safety informationlabel. If you don't smell gas, go to next step.4. Locate pilot assembly inside unit.PILOTBURNERFLAMESENSORIGNITOR1. Turn on/off switch to "OFF".TO TURN OFF GAS APPLIANCE3400610 33734 Rev K 11/12
F. Operating Instructions for the “S” SeriesFOR YOUR SAFETY READ BEFORE LIGHTINGWARNING: If you do not follow these instructions exactly, a fire or explosion mayresult causing property damage, personal injury or loss of life.A. This appliance has a pilot which must be lit byhand. When lighting the pilot, follow theseinstructions exactly.B. BEFORE LIGHTING smell all around theappliance area for gas. Be sure to smell next tothe floor because some gas is heavier than airand will settle to the floor.WHAT TO DO IF YOU SMELL GAS• Do not try to light any appliance.• Do not touch any electric switch; do not useany phone in your building.• Immediately call your gas supplier?from aneighbor's phone. Follow the gas supplier'sinstructions.• If you cannot reach your gas supplier, callthe fire department.C. Use only your hand to push in or turn the gas controlknob. Never use tools. If the knob will not push in orturn by hand, don't try to repair it, call a qualifiedservice technician. Force or attempted repair mayresult in a fire or explosion.D. Do not use this appliance if any part has been underwater. Immediately call a qualified service technicianto inspect the appliance and to replace anypart of the control system and any gas controlwhich has been under water.Due to high surface termperatures, keep children, clothing and furniture away.Keep burner and control compartment clean. See installation and operating instructions accompanying the appliance.FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity ofthis or any other appliance.Lighting Instructions for the “S” Series3. Wait five minutes to clear out any gas. If you smellgas, STOP! Follow "B" on the safety informationlabel. If you don't smell gas, go to next step.4. Find pilot--follow metal tube from gas control. Thepilot is behind the burner pan.LIGHTING INSTRUCTIONS1. STOP! Read the safety instruction label. 5. Turn knob on control counterclockwise to "PILOT".2. Turn gas control knob clockwise to "OFF". 6. Push in the knob all the way and hold in. Immediatelylight the pilot with the use of a paper match and lighterrod. Continue to hold the control knob in for about oneminute after the pilot is lit. Release button and it will popback up. Pilot should remain lit. If it goes out, repeatsteps 3 through 7.If button does not pop up when released, stop andimmediately call your service technician or gas supplier.If the pilot will not stay lit after several tries, turn the gascontrol knob to "OFF" and call your service technicianor gas supplier.7. Turn gas control knob counterclockwise to "ON".Knob can be turned to "ON" only if the control knob ispopped out.THERMOCOUPLEPILOTBURNERTO TURN OFF GAS APPLIANCE1. Turn gas control clockwise to "OFF. Do not force.3400811/12 33734 Rev K 11
Page 4 and 5: These gas log sets are available wi
Page 6 and 7: D. Step-by-Step Installation1. Unpa
Page 8 and 9: 7. Place the Logsa. Rear LogThe rea
Page 12 and 13: G. Glass DoorsIf your fi replace is
Page 14 and 15: Service PartsImperial 36” Gas Log
Page 16 and 17: Service PartsImperial 36” Gas Log
Page 18 and 19: Service PartsFI42M, FI42MLBeginning
Page 20 and 21: N. Troubleshooting - “M” Series
Page 22 and 23: P. Accessory Parts (For “M” Ser
Page 24: WARRANTY CONDITIONS:• This warran

33734K- Imperial Gas Logs.indd - Hearth & Home Technologies

Create successful ePaper yourself

Delete template?

Save as template?